Search results

Well Guys great success with the sensors they are fixed. Recap of symptoms no ticking on middle two sensors, no sound, orange/red flashing switch light. After following tip on here two sensors drilled out and replaced ticking sound now evident on all 4, but still flashing switch light and no...

Ps. Think my voltmeter was connected wrong way round shows - 12 v lol

E bay regulator kits are really inexpensive and work just fine, I have replaced mine for around £20 complete with cables and motor and to be fair it's not a difficult job. I think it was just timing that it played up when battery was replaced and unconnected. I go forward with the view it's when...

Just a quick post to say thank you for the tip, I drilled out the sensors today and as You advised it worked a treat. To anyone doing this I would add my sensors when drilling started with a aluminium disc just below the outer shiny bit that started spinning as the drill bit-bit, persevere...

Hi Guys, well first of all let me apologise for not been here in a while, various reasons pc died lost everything and had to save up for new one and have been concentrating on my new business too. The latest issue I have tried to tackle is my rear park sensors on my 2006 Td4 facelift. I bought...

Another common problem is the fuel rail pressure sensor and the related wiring harness as covered on this forum many times worth looking at !

Is the water pump working ?

ha ha not guilty must be the wife's

Mine did exactly that same symptoms etc etc mine needed to be used it had been stood for a long time and the previous owner had a turbo go possibly leaving oil in the intercooler. If You read my posts from last year it probably reads like it's your vehicle but injector refurb did seem to help...

Hi Yes I did get the transponder transferred to a new key which had to be cut and I also got another replacement key with a transponder in it that had to be coded to the vehicle so I am now where I should be with the peace of mind of two fully functioning keys and fobs which to be fair was long...

Well just when You thought it was all sorted the one step forward three back rule applies my wife got in the car this morning and I noticed a brake light out so I opened the boot cubby hole to get a bulb and torx driver fitted it then the lock wouldn't turn my wife noticed the key was shorter...

Well I don't know whether I dare post this thread but I am totally ashamed with myself for going against my own values but at least I am warm! Today I decided to do the thermostat modification as recommended by Nodge and others which I didn't like the thought of fitting a dare I say it Renault...

I had the same on my TD4 FL1 and tapped the electrode through into the cylinder, removed the injector and put a vacuum cleaner tube in the injector hole and at the same time used compressed air through the glow plug hole to dance the broken bit around until the vac could get it. The whole...

Gates is good as recommended by AL Murray ,"good old British brand". well probably! I just don't like loose ends on my nearly great Td4 I do it with everything I have to remove every nut and bolt and replace with shiny things it's a sort of curse I'll wake up in the night thinking my thermostats...

I can't believe the language coming from Your mouth Nodge You mentioned Re#?$*lt on a Landy forum that's blasphemy I can't even say that word never mind put a part on my beloved Td4 that's from the snail murdering frog eating capital of Europe :eek:

I had a 2011 FL2 le sport auto and the rear diff bearings went very quickly a message direct to Landrover and a phone call or two got the main dealer to fix it foc with new bearings etc. I did experience oil been blown out of the diff afterwards and it took 3 visits to sort but eventually ended...

Brilliant thanks for the replies, seen as though the consensus is it's an awkward job taking hours I think I will wait until summer to tackle the job I will go the longer way and fit a genuine LR thermostat and new o ring I think as the thought of two thermostats sounds a bit dodgy if the...

The temperature on the gauge in the car is only reading 1/4 and has all the time I have had it so I'm thinking it may also affect my fueling if the ecu sees the temperature low too.thanks for reply.AL

Hi all, can anyone advise me please ? How difficult is it to replace the thermostat on a facelift 2006 FL 1 TD4. I can see it is TRICKY to get to but on the face of it there looks to be just 5 torx headed bolts 3 on the housing and 2 connecting to the rear of the head area, I have wondered if...

I would say 99.9% immobiliser issue the fact you can start it after a lock unlock is a fairly good give away and that should have been the immediate diagnosis from the investigating garage, join the RAC and get them to diagnose it on a call out I think You can join and get them to a break down...