Search results

Hi Nomad. What Andy said is usually right, I stumbled upon this old thread. The new sunroof was fitted buy the previous owner who is a member (Arctic). He also did a lot of maintenance work on the rails and roof. Must have been at least 8 years ago. I am sure he would not mind you asking him. I...

Both pairs SOLD

The controller PCBs are part of the FBH. From what I understand, the D1 & D2 were fitted with a CAN bus Themo Top C/Z, remotely started by 12v+ to pin 1, or 12v- to pin 3 using any 12v relay RX/TX module, depending on the PCB. The D3 & D4 were fitted with a WBUS Thermo Top V that requires a...

Replaced the drop links, and the track rod bushes. Removing the air filter housing gave plenty of room to remove the wonder why E18 bolts from above. DAB-002's pressed in nice enough, found a good size collar, fairy liquid, fitted a nut & bolt and gave them a twist as I pressed them in.

Brand new Haul Master 18" long 2" standard receiver tube and ball mount for sale SOLD

For a Freelander 2.0 Td4 MK 1 (L314) (1997-2007) Brand new still in the box, purchased from J & R CV Joints SOLD

Sure was Ian, worth far more to SWMBO than the £3k we agreed on, she loved it. She was glad a mate mentioned it to his Mrs, who bought it.

Freelander now SOLD

Amended a mistake. The VCU was replaced with a brand new GKN VCU

Thanks

:)

The start stop such as moving the vehicle, or on/off the drive, will not cause electronic damage, every time the start signal is cut, the PCB will just shut down and reset. But the combustion chamber does not get chance to get hot enough to produce carbon dioxide & water before it starts shut...

PMSL

Howdy Kane

Welcome. I do not understand this, or what the cooling problem is. If it started after you changed the coolant, can only guess you have air in the system.

SWMBO’s Freelander. SOLD Freelander Td4 HSE. Registered 24th December 2003. MOT expires September 2021. Mileage 102,500 Detachable tow bar with twin electrics & key. Full Harmon Kardon with subwoofer. Matching spare wheel alloy, tyre never used. Chrome spare wheel surround for Summer, leather...

Yup, and tell the FBH to get up & get dressed.

I have 2 PCB's I have repaired, that check out electronically, so in theory should work. the 10 or more I have sent out have all worked when fitted, but not seen them since last autumn, all this covid horse**** isn't helping. Both check out electronically, so in theory they should work. I tried...

I have used WTT on the L322, and used a resistor on pin 2 to pull down the voltage to fool the software, but it is tooooooooooooooooo much ****ing about. The best way I have found to diagnose the L322 FBH, is to use a analogue PCB from a boat, MG Rover, Freelander, early Disco, or an...

Has something driven by the aux belt seized, you never said where the smoke was coming from. It could account for the squealing, and the smoke, and the hot belt could have melted to the pulley/s. Well it makes sense to me.