Search results

2005 Disco 3 FBH has decided to start chucking out ridiculous amounts of smoke. I have had the car 2 1/2 years and it has not done this before. Set off Christmas Day and there was a bit of smoke when I got 100yards down the road but thought nothing of it. Half an hour later, pulled up at traffic...

gstuart, I've been a bit busy and only just seen your latest post so apologies for not replying until now. Anyway, I got the new (second hand) switch, fitted it,still no fogs! Not quite at hair pulling stage yet so checked through everything again. Tested the new switch just incase, pulled...

Thanks guy's, very helpful. I have now checked the switch, power to it is ok and power through it to headlamps ok but nothing through fog lights part. everything else seams to be as it should, bulbs, earths etc so have narrowed it down to the switch itself and ordered a new one. fingers crossed

no fog lamps on disco 3. checked fuses and relays and found no power to fuses 32 & 38. why would this be?

What did they charge you

It is a strange one and no doubt I will find out what it's for eventually but yes, for the time being I will just seal it up. The fact that it's sucking air in it must affect the performance so I may well see an improvement, hopefully! If I find out what's ment to be there I'll let you know...

Doh! Cant work out picture upload but basically the 'hole' is in the middle of the inlet manifold, directly below the centre of the exhaust manifold. its as if there should be something in there like a sensor or something? if I can work out the uploading I will post a picture

Well I knew it wouldn't be long before I had another puzzler. I've got an air sucking noise when the engine is running, 200tdi, and have narrowed it down to a threaded hole in the manifold below the turbo that is sucking in air. If I put my finger over it it stops but it does not seem to...

Right, finally got around to looking at it again and started with a fully charged battery. Started it up, dash light goes out, let it run and check voltage across battery terminals. 13.5 volts and steady, simples! Probably best to keep checking though. Thanks for the inputs chaps, here's to...

Thanks fellas, I'll check to wiring and connections tomorrow before rushing out and buying anything. Yes the light was staying on before the change, after the change the light went off but the voltage reading at the battery was only 12 on tick over and also at higher revs which is why I'm a bit...

Just joined yesterday and realised I haven't introduced myself. I have just bought my first Landy. 1988 Defender 90, 200tdi, 2" lift, side exit exhaust and off road chunky tyres. Oh and a Puma bonnet with aircon grill and a nice shiny paint job. Other than that everything else seams pretty...

Chunkymonkey, Which leads do you mean and how am I suppose to check them? I had convinced myself it was the alternator and intended getting a proper one tomorrow but youve made me think it ain't that now

Only reason for trying a mini one is because it was Sunday morning, nowhere is open to get a proper one today and I had one lying around that I new worked so I thought I'd try it. It does work , or at least the ignition light now goes out but it's only putting 12v to the battery so I guess it...

Can someone tell me if it is totally out of order to put a Mini alternator on a 200tdi engine? at the moment it has a Lucas B127, the mini one is a Lucas 115/45 and it fits but wasnt sure what problems this may cause. Cheers.