Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. X

    Clutch problem, sometimes drops

    Hi all, slight issue with my 300tdi, sometimes the clutch pedal sits low, if u pull it back up it will operate normally, I've read about the clutch fork bending but if that has happened surly it will be down all the time, iv had a similar issue before on another car and it turned out to be the...
  2. X

    Cheapest diesel for a long time

    Cheapest about I've found is £1/ltr in tesco
  3. X

    Newbury/Berkshire Laning

    Be interested in joining an outing soon! From the camberley area with a lifted and mid tyred disco, removing the arbs and making a DIY snorkel this weekend!
  4. X

    Fourmarks Alton?

    Been advised to get a snorkel which is next on the shopping list, are there any pay and play sites around us then?
  5. X

    Fourmarks Alton?

    Hi all been looking for places to do some off roading around the hants area and a mates said about this place in Alton, anyone been? Or know of any other good sites? I've got a disco 1 lifted on mud tyres so it should be pretty capable. Thanks tom
  6. X

    cheapest place for svo?

    1.35 a litre in Asda!
  7. X

    cheapest place for svo?

    Hi guys were are you all getting your svo from? Cheapest iv found is 1 pound a litre from asda, planning on running a 75% svo mix in a 300tdi disco and less when it gets colder. Thanks
  8. X

    blanking the egr

    Hi all, to blank the eff do you just need to put a plate into the join between the inlet manifold pipe and the the egr pipe and block the vac pipes to stop it openning? Or do I need to remove the whole unit from exhaust mani? Thanks
  9. X

    Noob in need of advice in first head swap

    ok cool ordered a 3 hole gasket set and replacment bolts, now just need to track down a replacement head!
  10. X

    Noob in need of advice in first head swap

    ah i take it the Hole number is for thickness identification? i think il just find out which came from factory and fit that
  11. X

    Noob in need of advice in first head swap

    Had a look, its got one thick ribbed belt and a slightly thinner belt running the AC. Is there any way to tell which hg is needed?
  12. X

    Noob in need of advice in first head swap

    yea checked the clearences today, they seem within limits (0.20). also i think its a 300tdi? its a 2.5 tdi "ES" on an N reg
  13. X

    Noob in need of advice in first head swap

    Hi all, got a top end rattle in my newly accuired 300tdi so im going to change the whole head and do the gasket etc at the same time. how difficult is swapping the heads? can it be done in 1 day? i understand they are push rod so that shiould make it alittle easier, any trickey bits or is it...
Back
Top