Search results

Thank you

Just to check, should the white /red from the solenoid be on the same terminal as the white that goes via the fuse to the alternator and the distributor?

Thank you, I’ll check that

I have rebuilt a series 3 2.25 88” . I replaced the wiring loom, alternator but left the engine as it runs very well. On starting it never fires while cranking but consistently starts as the key is released and runs perfectly thereafter. Is this normal or have I made wrong connections somewhere?

paddock sent me the top hose pictured and the one I need is the bottom one pictured. Strangely, in the parts manual, the top one is pictured as a 2.6 hose and the bottom one a 2.25 hose but both have the same part no. Paddock say they have supplied 300 of the longer hose with no complaints and...

On the outer edge of the seat box.

Thank you, foun the location.

I’ve painted this panel but I’m b******d if I know where it goes! Any clues?

Thanks

Are they plastic a described as cushion corners? Thanks for the response

I have recently finished a late series 3 rebuild with adjustable seat runners and seat bases. I am currently coming to the end of a complete refurb of a 1973 series 3 with non adjustable seats. There were no seat bases and I would like to know if this is correct and if so what secures the seat...

Thank you. I think I might have found the part with yrm, it is a seat belt anchor!

I am getting to the end of a full series 3 restoration with new chassis. I am missing 2 right angle brackets that attach the inner front chassis vertical lugs to the front of the tub. They may have slotted holes on the bulkhead vertical. I can find no reference to them on any parts diagrams. Can...

Got all the correct mounts, thanks for the advice

Will that be OK with 1/2 ton when the crane is at full stretch?

No bulkhead, thanks for the brake pipe advice.

I’m ready to install engine and gearbox onto a new Richards Chassis. I have an engine crane. Any ideas as to which to put in first would be much appreciated. I can access the chassis either from the side or the front with the crane.

I have bought 2 bulkheads from Robert Owen and I highly recommend them. In both cases they fitted to Richard’s chassis with absolutely no fettling.

Thank you, I think full assembly is the way to go.

Thank you