Search results

I fitted a piece of smoked plastic over the clock & outside temp displays. It makes it look much better. It also make it slightly dimmer at night which is what I am after.

What are your tuning plans for the Td4 Winu?

Yep 😎

What size engine does a Td4 have?

Drove it to get a Christmas tree.

This is 25mm too far. You will end up with massive problems, even if you can get the camber sorted. Best kit out there is made by ASA Fabrication. Costs a bit more though. Much better quality and won't stress the transmission so much. pm SES88 or find the thread on here about lift kits. He...

I stopped using 2-stroke oil a long time ago. I use Diesel Rhino. Much better. Google it. There is a very long thread already in this section on using 2-stroke oil. Consensus was low ash mineral 2-stroke oil. I used Halfords garden tool one before I stopped. Diesel Rhino does a much better job.

I did a quick search and came up with this http://www.landyzone.co.uk/lz/f9/heated-front-screen-retrofit-done-252183.html

It's been on-going for some time now I'd forgotten!! Doesn't hurt to check it though..... won't cost you anything. It's not unheard of to have duff new MAF...... Now you have sorted everything else. My Td4 is dangerously sluggish when cold the first time it is started in the mornings. I've...

I don't think anybody has said this yet, but the Freelander works the opposite to most 4x4's. To get the rear to work you need to get the front wheels spinning. Most people naturally lift off the gas at this point. On the Freelander you need to keep the gas applied otherwise the rears just...

When I test drive the SD4 prior to getting my Td4 I really liked it. Couldn't push it too much with the Mrs and the salesman in it though 😄

Disconnect the MAF and drive the car. If it improves then you need a new MAF. Disconnecting the MAF forces the ECU to use a default setting.

What's up with yours?

You need to find one LR sold to the AA. They did make a manual v6. Very few, but they did do it. the Freelander race series allows them, and they only allow factory produced vehicles.

I have 2 sets of wheels. 225/65 R17 General Grabber AT on my Evolution rims and 215/70 R16 Vredestein Wintrac 4 Xtreme on my 16" alloy rims. I have a 40mm lift and 30mm spacers. The Grabber AT cost about £111 each fitted. The Wintrac's were £96 each fitted.

Yes under passenger seat. The 6cd changer is under the drivers seat.

It's the one in the engine I believe so I guess high pressure as that is the important one.

Good to hear you sorted it.

I can recommend Vredestein. As good as, if not better than the big names but cheaper.

Thanks.