Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    Weber Carb

    throttle is in the same place. The only differance is the choke cable which is a bit longer than standard
  2. M

    series 3 petrol to 90 2.5td!!!!! HELP!!!!!

    pretty sure the threads are 1/2" BSP
  3. M

    series 3 petrol to 90 2.5td!!!!! HELP!!!!!

    its built into the TD radiator. 3 options: either use the TD rad and somehow make it fit ( i have seen it done but it's messy), use a separate oil cooler (my preffered option) or use a 90 front end.
  4. M

    series 3 petrol to 90 2.5td!!!!! HELP!!!!!

    yellas right cut the old one off the chassis and make a new one, the rubber will sit much closer to the chassis. The series clutch will fit straight on the 90 flywheel. Other problems are the fan will sit too close to the rad (if you use the series rad). You will need to cut the battery...
  5. M

    Workshop needed in Glos

    Hi, does anyone know of a workshop i could rent in mid Gloucestershire. It turns out my S3 is in worse nick than i thought and needs some serious work. Thanks in advance, Mike
  6. M

    Snorkel Air Cleaner, which is which?

    Most filters work by trapping dirt on the outside with clean stuff coming from the middle so that would be my guess!
  7. M

    Ignition lock barrel jammed

    the one on mine mashed the innerds up and the key snapped, best to cut off the steering lock with a dremel or something, then take the switch off the back and start the thing with a screwdriver
  8. M

    info needed again

    I'll help out but like slob says if its wrong don't blame me. 333487 side to body seal (need 2) MTC6960 hard top to screen seal 334611 roof to van side lh 334610 roof to van side rh Try looking on lrseries.com they stock alot of parts that i have had trouble getting from paddocks etc and...
  9. M

    new hood

    Try All Wheel Trim LTD
  10. M

    Swivels and the MOT

    Cheers guys. I don't have any leaks so fingers crossed all should be well.
  11. M

    Swivels and the MOT

    Hi, the swivels on my series 3 are showing some pitting, is this an MOT failure? If so what parts would i need to overhaul? Thanks in advance
  12. M

    Load Cover for 88" SIII Truck Cab

    all wheel trim ltd sell them
  13. M

    Glowplug wiring query

    Would i not still need the resistor even with the diesel ignition switch?
  14. M

    Glowplug wiring query

    Hi, i am in the process of putting a 2.5TD into a series 3 (previously petrol). Do i need to use the timer relay from a 90/110 or just the series glowplug resistor? If i need to use the relay do you know what the terminal connections are? Do i need to use a fuse? If so what rating does it need...
Back
Top