Search results

it should have 3. One from the fusebox, one to earth, and one to the gauge. I don't know which wire goes where though.

depending on the make the springs are handed make sure you have them the right way round. if this is right try doing up the shackles with someone sat in the drivers seat

get a defender one, you need to chop the tunnel to fit it anyway

undo the six bolts holding the swivel onto the axle case. pull the hub and halfshaft out complete. you will also have to disconnect the brake hoses.

looks pretty straight. Is it solid?

do you have holes in the tub capping just behind the back of the truckcab? I think that landys originally built with a full tilt don't have the holes for the front stick of the 3/4 tilt.

just swap the diffs, as long as they are 10 spline they will fit. Most people get them from a RRC but i think disco ones may fit?

Hi, i have just seen o post from you on the series forum subject "series 3 lwb axle wanted". I was wondering, if Tommywhu isn't interested in the chrome swivels that you offered, would they still be available. I am looking for some for my S3 swb. I visit Hinckley a couple of weekends a month...

why change the transfer box?

try steve parker exhausts

Land rover Series truck cab trim on eBay (end time 12-May-10 20:51:41 BST) or LR series do them as do Land rover orphanage Part no. is 346325

did you load it up a bit when you did the bolts up?

Don't be daft!! A 109 weighs between 1600 and 1800kg depending on the roof etc. and a trailer capable of carrying that will weigh in the region of 800kg. You will be well over the towing capacity that is set for a reason. Pay a collection company to do the job for you. My mate is having a Jag...

the arrangement of it looks like one of the big Warn winches. Can you make out the name on the top of it?

yes. thats the way i did it. They might be quite stiff so best to put some tension on the thread then give the end a smack with a hammer to start it moving

try the land rover manual. the diagrams are as simple as you will find

or new concrete slabs

Industrial car wash fluid might do it (AKA traffic film remover or tfr)

Maybe you aren't spinning it over fast enough (because it has stood for a while). Try jumping another vehicle/battery onto the one fitted to give it a bit more oomph.

do a search it's been covered loads of times