series 3/4 tilt questions
- Thread starter Series71
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
stick the sticks in the 'oles and clamp them down
- Posts
- 83,308
- Location
- Embasinga stocæ
do yu have 'oles? front and rear?
I take it yu dont want my sticks then?
I take it yu dont want my sticks then?
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Have you got the truck cab on???
- Posts
- 83,308
- Location
- Embasinga stocæ
my truck cab dint have holes at the front - it used a nut-plate that fitted under the front capping and the front hoop had a flat "foot" on it which was screwed down, thru the capping into the captive nuts underneath
1396midget
New Member
- Posts
- 273
- Location
- York
as above with mine as well, though i just had massive wood screws in mine (hooray for P.O.) and no captive nuts, bolted it on instead and tied the back down, job done
mikebeetle
New Member
- Posts
- 143
- Location
- Leicestershire
do you have holes in the tub capping just behind the back of the truckcab? I think that landys originally built with a full tilt don't have the holes for the front stick of the 3/4 tilt.
