Search results

Trigger wire on the starter seleniod, small wire with a spade connector, pull it off clean connection and refit, hope this helps, you should be able to do this without jacking it up as its on drivers side in line with the rear of the wheel

Can I just say I wouldn't advise doing any lanes alone, most of the lanes in that area don't have phone signal and a breakdown or other problem could turn into a nightmare.

I'll be there all weekend,will be on the Staffs4x4 stand

Some piccy's Quest 4x4 Slideshow by scoobytim_2009 | Photobucket

Loads of room there

Directions: From either Tywyn or Dolgellau, follow the A493 to Fairbourne or Friog (postcode LL38). Any through road (not dead end) will bring you up to the site.

There's something for everyone there, so much space it's unreal, you've got to go mad to cause any damage, there's some slippy areas so getting stuck is a possibility but that's part of the fun, plenty of people there to pull you out if stuck :) I'll be there for the weekend

Check panard rod bushes for play

With steel wheels the nuts have a taper as do the stud hole in the wheel, as such it doesn't matter about any gap, they are designed for alloy wheels with nuts that don't have a taper to locate the wheel

Run a the smaller arb compressor for 2 Ashcroft lockers, copes easily

Just thought I'd say it was the speed sensor on transfer box, just incase anyone has same problem

Just take the crown wheel out ( 4 bolts ) then put empty diff casing back on axle, will keep the crud out

Weather forecast don't look to be honest, been watching it hoping it will change, I'll be up there Thursday and do a reccy friday morning of the first lane, I'm off work now till next Friday :) a couple of small jobs on the landy and I'll be ready. Looking forward to this and sure it will be...

I'll be going up on the Thursday afternoon as got the time off, won't be such a long Friday for me then lol, Paul do you want me to reccy anything while I'm waiting for you? See you all soon :)

Had the same problem with mine, it was the plug on back of the headlight bulb, changed it and all was ok, as nrgserv said it had melted due to bad connection

New addition :) bed for the laning weekends Stored position, keeps a reasonable amount of room for the kit I have to take to work with me Deplored, it gives me a 6' 1" X 4' 6" area ( double bed size ) I've got a futon bed matress on order and will be here shortly, jobs a good one :D...

Got my bed sorted :) Stored Deployed Just mattress to sort now

If you have to use a hi-lift use a check strap to hold axle to chassis

All changed over now :) Have changed to cooper ST-MAXX on -32 offset D mod wheels for road and greenlane and swop to special tracks for P&P

I buy flat aero type from home and bargains, £3 each and are spot on and last ages, last set were on 18 months no problem, just bought some more for the replacement disco, they hold up well even wiping copious amounts of mud lol