Search results

This may be the issue then. I did not realise the ribbed pulley had a position as I thought it was the trigger pulley that caused the injector pulse?

w sorry long story short. I ordered a new pick up ring not realising the early one had a built in spacer where as the new one is thin. Fitting the new ring on the old pulley means nothing lines up so to get it working we made a spacer. I have ordered a newer style Aux pulley which cures the...

No, the crank pulley has not been off.

Hi folks. I’ve still got the same non start issue. I’ll provide an update of what we’ve tried. The pick up ring was badly worn with bits on the outside of the ring missing. I’ve got a new ring and we’ve temporarily made up a spacer so the new ring lines up with the CPS. Plugging in to the car...

Thankyou for the info, it’s much appreciated. I have looked at the updated trigger wheel kit, the only bit that I can’t quite figure out is the new style trigger wheel doesn’t seem to have the wider centre which means it sits closer to the crank pulley which in turn means the aux pulley will...

Hey folks. I’ve purchased a new pick up ring that sits between the crank and Aux pulley from INA however although I am told it was correct for my 2007 freelander 2 it doesn’t seem to be correct. It fits the same as the OE one howecer the OE almost has a spacer built in to the middle where as...

Another issue. After swapping out my EGR cooler I still have a leak from rear left of the engine. I thought the waterpump could be the culprit but to be sure I decided to remove the lower cambelt cover so I could observe it when running. To do this I removed the aux pulley and belt and undid...

Hi Matt, I’ve only just spotted this thread. Did you solve your leak?

I understand that yes, and see picture below as this is the difference. I was just hoping that someone had actually managed to to buy and fit one that is the correct size. I did spot that it says suitable for 2008-2012. Mines an 07 but I’m sure the cover/PCV would be identical??

Nothing I can obviously see, the diaphragm is in one piece and the spring seems fine. The only but that I would question is every PCV I’ve seen has a plastic reinforcing ring under the diaphragm. My OE one literally is the spring, diaphragm and plastic cover. If this is normal then I’m happy...

Hi folks, I’m trying to just replace the PCV round cover/spring and diaphragm. I’ve ordered one which was incorrect and tbh I’m struggling to find the right one. My Freelander is a 2007 “07” model. Does anyone have the link for the correct one please? Help much appreciated :-)

I ordered this PCV and it doesn’t fit, even though it says it does. The new one is too big. Does anyone have the link so I can order the correct part? Cheers :-)

What does the repair kit consist of, all I can see on the PCV is the spring/diaphragm, and a few specific orange seals?

Evening all, So I’ve just diagnosed a faulty EGR cooler which has given headgasket symptoms. Prior to removing it the top side of the engine at the rear was covered in oil which appeared to have come from the intake pipe joint at the rear left. I’m led to believe that a fautly PCV can be the...

Pardon my ignorance, how does a leak mean no heating, is it Water taking path of least resistance ?

Did you ever cure this?

Thank you… this will be the first thing I look at 👍🏻

Good morning everyone, I’m just about to pick up a 2007 Freelander 2 diesel. Purchased as a project but the plan is to fix and keep. She has a water issue, I’ve not yet laid hands on her but figured if I explain the symptoms relayed from the current owner you may be able to point me in the...

Good afternoon folks, My 2009 D4 has just been to garage for MOT and a new passenger side blend heater motor. Motor all sorted however randomly now the car is saying that it has Zero fuel in and zero miles on the range? We’ve dropped more fuel in her and no difference, still reading zero...

Yes, the 3/4 length ones that stop just shy of the drop in the roof where the sunroof is👍🏻