Search results

No joy with that, It's getting to the gas axe stage I think, It's solid !

Thanks Wolf, not got that far in yet it's the end of the hub with the 5 bolts that won't come off !

Which two hub nuts ?

LOL used a size 6 removal tool no joy !

HELP! sorry all I need help again! needed to fit new front discs on my 90 all was going well until I tried to get the centre hub off, the 5 bolts removed circlip and washer removed but the hub will not move on the splined shaft, any ideas on how to get it off ? Thanks all Russ

Trax, can you tell me where you got your shovel holder from ?

I had the same problem with a set of smiths alloys it was because they were not seated, if you remove the wheel and look in the inside of the wheel you will see the mark the hub has left, one way is to fit spacers or do what I did and buy a cutting burr and bit by bit cut the alloy from the...

Have a disco box in the garage if you want it.

The pipes from the lift pump to filter then from the filter to the injector pump

More help please, filter changed, pump changed still not running right, can anyone tell me were I can buy new diesel pipes from, I had to make my pipes up with a join at both ends, think this could be the problem sucking air in. Thanks russ

yes a brit part pump!

Hope you all can help, again. I fitted a 200tdi disco engine in my 90 a few months ago, it went for it's MOT and I was told the lift pump was leaking so I fitted a new one, all was well for about 4 weeks then the old bus has started to struggle on hills, as if I was running out of diesel, she...

I have a pump, and the pipes off a 2.5 tdi with all the pipes if you want them, need to be collected from north yorkshire.

Can I buy some? My lanny is like the black hole of callcutta, If I drop anything I have to get a torch out !

I used a big masonary drill the builder left at the house after doing a job, it was about 2ft long. Did the job.

is the wire ok that runs from the chassiss to the transfer box, had the same prob and it was the bullet connector.

Crucifix seals ... ?

Sorry, It's in a 200tdi.

Hi all can anyone give me some pointers on fitting a rear crankshaft oil seal please, I've had one attempt and don't want to %&*$ it up again ! Thanks.

Anyone help please, putting a 200tdi disco engine in my defender and suffering wiring problems. Can anyone help with a diagram of the engine bay wiring, or just tell what wire goes to what !