Search results

Cheers mate

Cheers! I will suggest that and lend him some MAF cleaner

Hello, I’m trying to help my mate out with his poorly defender. If anyone could help us out please that would be amazing! :) (he wrote the below) “I have a 2003 defender TD5 15p engine, I was driving on the dual carriage way and I heard a noise, the engine started limping and lots of white...

Also give your red plug off your ECU a check for engine oil like saxavordian said. It’s under the drivers seat

Could be your turbo waste gate rod sticking. It’s a worthwhile job anyway! I’ve put a link to a YouTube video that shows you how to loosen it step by step. I was having similar issues and this is what sorted it.

Afternoon! Is it vibrations you’re getting or the engine feels like it is jerking under acceleration?

Evening all, I’m fitting rear inward facing seats in the back of my landy, except I cannot fit the bracket for the seat back on one side due to the position of the fuel filler cap box. I’m sure many have overcome this issue - I’m just wondering what the best solution is to fit the seat. Do I...

Interesting, thank you! I’ll see if the Haynes manual or landyworkshop has a diagram of the mechanism.

Hi all, I can’t seem to open my drivers side door from the inside or out. There is central locking in the car. hoping someone else has come across a similar issue and wouldn’t mind giving me some tips please. I’ve got the door card off and am trying all sorts of ways to unlock it but having no...

Morning Craig, I have tested with the MAF unplugged and no misfires. Am I okay to drive it without this unplugged until fixed?

Those photy’s were taken after my lunch break :D

Sorry mate, I’ve only just seen this! Didn’t get notified for some reason! Thanks for the advice. The nut on the big wire is so corroded, I think it’ll snap the bolt if I go too hard. However, I got the plug off and sprayed everything with contact cleaner and toothbrushed it (not my current...

Good stuff, I’ll report back tomorrow!

Nice one, I’ll try that tomorrow. Do you unplug the MAF then take for a drive to test?

Hi all, Hoping someone would kindly offer some of their landy wisdom or link a useful thread they know of I have noticed a slight loss in power and also a few misfires on harder acceleration. The landy has been remapped. Earlier in the year, I changed the injector harness and also did the seals...

have you got any tips please on how to remove that plastic plug at the back cos I’m really struggling to get it off:D

Okay will try that now, cheers

Voltage from the plug with ignition on Voltage from the plug with engine ticking over voltage from bigger lead that goes to the starter hopefully you can see the voltages on the meter in the pictures. I tried my best to get the probe into that plug.

Haha I will try my best:/

I’ll keep posting updates! Hope you get it sorted.