Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. hoss A

    vcu recon

    used a 6mm diamond core drill to remove the bearings on mine ! its the same type of drill used to drill ceramic tiles and glass ! i'll take a pic of it tomorrow if I get chance they can be bought from b&q or a good tile stockists ! used a cordless drill on slow and don't let the bit get too warm...
  2. hoss A

    abs system

    change the block n bleed ! simples ! didn't have to plug mine into a reader just remember to bleed in the right order ! just two 10mm nuts to undo at the base of the block . the brake pipes and the wiring connections to undo !
  3. hoss A

    abs system

    sounds like you have a blockage somewhere or the seals on the valve are shot ! better off changing the abs block ! couldn't get mine to reseal !!!
  4. hoss A

    abs sensor ? made of gold

    all 4 of mine are fleabay specials !
  5. hoss A

    abs system

    I think there shuttle valve covers ! had one of these blow out on mine ! brake fluid all over the place
  6. hoss A

    ABS Lights staying on

    as yours has the abs sensor secured by a bolt it is the later type with no abs ring ! has it had a new wheel bearing as theres two types of them as well !
  7. hoss A

    ABS Lights staying on

    did you fit like for like ? theres two different drive shafts for the freelander one with a abs ring on the cv joint and one with a magnet fitted in the bearing I believe , if you fitted one without the abs ring it will bring the 3 amigos on and vice versa !
  8. hoss A

    Stahlwille sockets

    pm sent !
  9. hoss A

    freelander 1 tailgate handle !

    hi klunk still looking for one how much you want for it bud ?
  10. hoss A

    freelander 1 tailgate handle !

    mines hanging off !! the tw@TS just ripped it off so its only the wires holding it there !
  11. hoss A

    What's the score with this then??

    sealed unit and as far as im aware they cannot be split !
  12. hoss A

    freelander 1 tailgate handle !

    anyone !!!
  13. hoss A

    freelander 1 tailgate handle !

    wanted , freelander 1 tailgate handle not bothered about colour as long as 2 of the 3 fixings are ok ! some #### ripped mine off trying to break into it ! Alan
  14. hoss A

    Glos to newquay to Hull to redcar to Glos

    yes ! big les ! he was a right one , davis,s lived at top near the flats , and seem to remember the mcbrides some where in the old grey matter !and the POSH flats arnt that posh ! just over priced ! who wants to live nr a flyover FFS !!! how stupid can ppl get !
  15. hoss A

    Glos to newquay to Hull to redcar to Glos

    went to court park school ! they where just building high court flats then ! remember the fights well !! stupid fighting over a tire and a bit of rope tied to a tree ! but we were kids then and didn't know any better ! what year did you leave feldane ? do you remember the davis's and the...
  16. hoss A

    Glos to newquay to Hull to redcar to Glos

    was born down eaton street !! moved onto orchard park when it was first built ! a lot of hessle roaders moved there ! tried moving out of hull in the 80s but my parents became ill so moved back to look after them in 2005 !
  17. hoss A

    Glos to newquay to Hull to redcar to Glos

    who on earth wants to move to hull !! the best thing to come out of there is the A63 !!! I knows !! I lives here !!!
  18. hoss A

    change cam belt too?

    got mine as separate bits off fleabay for the grand sum of £50 belt tensioner and idler !!! I'll try n find the invoice to find out where from check out freelander-spares-uk-601 that's who I got mine from belt £21.96 Tensioner £13'96 and idler £12.41 + p&p
  19. hoss A

    Freelander engine ticking noise

    could be a sticking hydraulic tappet !
  20. hoss A

    change cam belt too?

    afaik the l series water pump isn't run from the timing belt ! its run from the aux drive belt !!
Back
Top