Search results

On the d3 forum a while ago there was a guy from one of the big South Africa LR clubs and they are convinced the cranks get snapped by harmonics like you say. Things like bad pulleys/dampers or out of balance TCs or flex plates. The SA guys also swear by slick50 style treatments in the tdv6 to...

And that crank still won't solve the oil pressure problems. That's what causes the spun bearings over time, the oil pressure is terrible on the entire line of tdv6 engines.

Get the codes read or it's just an expensive guessing game.

Yes cruise control is plug and play, just need to remove airbag and cut/drill a hole in the steering wheel to fit the buttons.

The r380s run well with automatic transmission fluid in them. Like a dexron 2. These oils have a lot of cleaning additives and are cheap so make good flushing oils, you could drive the car a few days to make sure everything is washed out.

From memory that's just the return from the fuel leak offs I wouldn't expect any kind of pressure, especially if the engine isn't doing any work

Who changed the oil pump? You can check the oil pressure sender wiring and see if its loose or damaged etc. If nothing is obviously wrong with the sender you need to fit a known good oil pressure gauge and see what it tells you. My advice would be to not run the engine until you can verify the...

The book tells you MTF94 or dexron 2 for the 380. Half of who you ask will swear by mtf and other half will tell you dexron atf. I ran dexron 2 atf in both my r380s for 200k+miles and never had problems.

If it turned off with the key then it's not likely to be oil runaway. I would get it on diagnostics and check throttle sensor readings.

Approx 250miles was quoted to me by Bristol transmissions as being the amount of 'history' the gearbox remembers and takes into account when adjusting for gearbox wear. When you reset adaptions this is reset to 0 so changes will happen quickly. It constantly monitors solenoid performance and can...

Good point about the previous owner, they could of had 2 tubes of anti shudder in there, or even lucas stop slip. How many miles has the car done?

Haven't seen anyone ask the cars mileage yet? Is the new oil red or gold? How many miles have you done since the work? It could take approx 250 miles for car to settle down as that's the approx lenght of the adaption cycle. Is there any marked difference in behaviour from when the car is stone...

Yes but not in UK, DPF was not standard fitment over here. If you have a UK D3 with a DPF then it is an import, a special order or a retrofit.

Dpf never fitted to UK D3s, regardless of age. I use magnatec stop/start which is A5. Plenty of it going cheap on ebay etc if you keep your eyes out. Got 16 litres for £55 last month.

How much of the history do you know? Could of had a failed oilpump casing at somepoint and been repaired.

There's apb on the Hartlebury site as well. Again not sure if they do big welding jobs.

Tried egdons? They got a much bigger workshop than mm

Drop the gearbox sump and see what's in it. This will give you the next step. These 4 speeds are not that expensive to get rebuilt, seeing as you've put a galv chassis on then I think it might be worth it.

Gearbox needs to be in neutral if you want to spin one wheel with the other 3 on the ground. Chock the other wheels well! You don't want it walking off

Massive thread on disco3.co.uk about this going back years and years. Personally I don't bother. Mate of mine with a perkins converted 110 has done it for years and swears by it.