Search results

Brembo do an app for your phone. Go through menu and see if the Brembo ones match you dims on the cars You then have a code to order the correct ones. It's worked well for a couple of my cars as I've come away with the wrong ones from the m factors before then.

Resetting might not cure it. There is a garage in Peterborough that breaks and fixes rangies. Try there

Thanks holiday chicken and saintv8. As it has to be thin walled then looks like a bodge it and sons job. purchase 2 thin walled non impact sockets and some pigeon du du

That's great much appreciated We're you measuring inside the socket or the overall length of the socket inc the 1/2 inch end. Thanks

Sorry I've relished this but I needed to edit the subject as it wasn't clear. Thanks

I know I need a 32mm socket to get this off but what depth do I need. I’m finding it frustrating only very few detail their socket depth I’m not prepared to pay £80 for one socket (bmw432). Has anyone found a cheap alternative as it’s not a hub nut socket required to get this off. Also is there...

I know I need a 32mm socket to get this off but what depth do I need. I’m finding it frustrating only very few detail their socket depth I’m not prepared to pay £80 for one socket (bmw432). Has anyone found a cheap alternative as it’s not a hub nut socket required to get this off. Also...

Why not try and find a late l322 that’s being Brocken and cut them out to do your repairs

36mm 12 point socket if i remember

Did you put the height sensors back properly or plug them back in

Just ordered radiator coolant hoses and left them in the order basket Didnt pay so next day they gave me the code IMBACK10 Might help you if your ordering from them in the next week or so

ive ordered the bearmach as they gave me another 10% off Code is IMBACK10 Will be back to tell you what they are like

you need to stick a diagnostics reader on it My problem was a solenoid inside the gearbox sump the diagnostics pointed to it straight away Saves a lot of time I used my own reader which was cheap

I have a very small weep on the lower hose so will replace before the artic winds blow I have decided to do the top hose as well . I would replace with genuine land rover ones but which is the best aftermarket ones Ive looked at Gates and Bearmach . I rang Bearmach and they told me theirs...

im going to put back the mobil 1 0w40 oil (new) and see what that does, plus looking at doing the vanos in the near future

As usual last minute rush to get a windsurf trailer up and running and give the rangie an oil change. Well the nice LED lights id purchased for the trailer were a crock of snitzel and didnt work at all. This is 7 at night . So 2 hour later lights from an old trailer board were put on...

last year I pulled the lot and put a pioneer head unit in and new amp and crossovers. Everything was working 100% when I took the stock items out. This includes the bm54 radio, amp , sat nav DVD reader ( has mk4 3D) , tv tuner, and the dash display. No water damage or anything wrong...

Ive nearly concluded my install of a pioneer AVIC F960DAB head unit , a pioneer 1200W 4 channel amp and 4 off 3 way crossovers The rear part of the car was not difficult. Took out the lear amp and the tv and radio tuner The cages that hold these in were cut and made into holders for the amp...

Repair it. You obviously have a bad head gasket. Do both whilst your at it a few buy quality gasket. You will need a big breaker bar and 6 point socket on the head bolts. Long 12 point socket for the exhaust manifold bolts

I'd put my bet on a inbalance of wheel diameters around the car or a tyre that goes out of shape Tyres are the main culprit. Had this on my old rangie and disappeared when I had new tyres all round. If your front tyres are slightly smaller than the rear then you will get a wobble...