Search results

OK, so I got it back up on the axle stands this morning and the wheel isn't stuck anymore, rotates both ways. Press the brake, they stop. Release the brake, they go again. Turned it on in first gear both back wheels going fine but the nearside still has a slight wobble. Also set off the carbon...

Yes, but not in an incredible hulk kind of way. I have it on wheel dollies.

I've heard this about the master cylinder before. Would it affect only one wheel? Could you explain it a bit more, I think there's a bit of free play but I'm not sure I'm talking about the right bit.

Hi all, Thanks for all the replies. I am getting the boiler in the garage replaced tomorrow so I had to take the LR off the axle stands and shove it out of the way in the garage. Hopefully I'll get it back on the stands on Tuesday and can come back with more info on how it turns.

Adjuster is fully off. It does seem to be the brake that is stuck on but I've tried everything I can think of brake wise and am wondering if there is anything else that could cause the shoes to jam on. Wheel cylinder has been replaced, I'm 100% that the springs are in the correct positions. And...

It's jammed solid, both directions. Before I put the brake fluid in it turned freely. Also, it's a 88 and before I put the fluid in I ran it while it was up on axle stands and there was a slight wobble in the wheel.

Thanks! Previously had a Hillman Imp that I could manage to fix when something went wrong but this is the first time I bought something that wasn't running. A new battery and changing the points got the engine going. Replaced the clutch slave cylinder but the clutch is stuck so I'm hoping that...

The wheel won't rotate before the brake is applied. I Haven't done anything to the handbrake. The other three wheels are fine.

Will do, thanks

Hi all, I have a 1967 Series 2a that I have been trying to get on the road. I rebuilt the brakes - new master cylinder, new pipes and new wheel cylinders and shoes all round and the rear nearside wheel sticks when I fill the system with fluid. I'm thinking it's the wheel bearing or a problem...

Hi all, I have a 1967 Series 2a that I have been trying to get on the road. I rebuilt the brakes - new master cylinder, new pipes and new wheel cylinders and shoes all round and the rear offside wheel sticks when I fill the system with fluid. I'm thinking it's the wheel bearing or a problem with...