Search results

Thanks for the info. I'm trying the bandade first then May be a stitch or five before I go for the full open heart surgery route. If it gets to that I may need your knowledge quite a lot ;)

Drilling the stop hole at the end might be a prob. Will see how the jb holds first

1/2 inch stitches from end of crack to core plug end i think

Cold weld. Cast rods. Burnt shirt. Smoldering chest hair:mad:

Rods. Short runs. Lots of amps. They dont like it upem you know ;)

A good jab with a rod is best but it takes time. And its a bastid on yer back ;)

If this jb stuff dont hold im gona cold stick it with some 77 cast rods. 80 - 130 amp

Runs from core plug so might crack further

Read up. Jb is an epoxy. And its good. Just bin on the tube watchin vids on it. Off to holfrauds tmoz.

Air line from fleebay. Lots of pritty colours.. ;)

Dont use fuel pipe . One long run No joints = No leaks;)

I will read up again;)

Me neather. Should be fine. He could take the bottom off and stretch it out and compare it with one of the old ones that he has

Is that a type of epoxy. Think i read somthing on it today looking through the options

Yep shock travel. They do go quite high specially off road axles crossed an all that;)

New plan. K seel and an epoxy patch. Run it for a month or two. If it still weeps stick weld crack and then weld a cast patch over that. 77 sticks at 3/16.

Might only have a prob at top level if theres not enough travel. Soon find out if it rides like a brick :eek:

Just said that;)

Might be usfull for the back box

Can you get at it with the wheel off and put it on a stand