Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. pete12345

    P38A Re-colouring interior trim

    +1 on that or furniture clinic do a complete kit with spray gun
  2. pete12345

    P38A Abs ecu

    Yer I’ve not changed my ecu Dan but on the nanocom it reads everything correct wheel speeds voltage brake switches on & off then the next two pressure switches say closed all the time stationary or moving slowly I was trying to find out at what point they should change to open that’s why I’m...
  3. pete12345

    P38A Abs ecu

    Found an old post not sure I’ve on here or another one now but it said I’ve you jump the connector from the abs pressure switch black& yellow wire to the neg on battery and the pump runs then the pressure switch is knacked can anyone throw light on this
  4. pete12345

    Newbie looking for SRS advice/assistance

    Are right got to find the dodgy connector 1st then cheers
  5. pete12345

    Newbie looking for SRS advice/assistance

    Where do you put the resistor to fool it
  6. pete12345

    P38A Abs ecu

    Thanks for replies
  7. pete12345

    Newbie looking for SRS advice/assistance

    Before unplugging and re plugging any connectors disconnect the battery and leave it 15 minutes because you could set the bags off
  8. pete12345

    P38A Abs ecu

    I’ve just checked the ecu again on a different page for brake switches & pressure switches vehicle stationary brake switches change from closed to open on pressing the brake but the pressure switches stay closed all the time even when I’m driving slowly and applying the brake could anybody tell...
  9. pete12345

    LATEST NEWS REGARDING "TOMCAT" ALAN

    I’ve there are range rovers up there Alan and his mate tony will soon be putting them right on a few things will be sadly missed on here
  10. pete12345

    LATEST NEWS REGARDING "TOMCAT" ALAN

    It’s on there for a few days
  11. pete12345

    LATEST NEWS REGARDING "TOMCAT" ALAN

    Very nice service for Alan thanks mozz
  12. pete12345

    P38A Abs ecu

    I’ve done the dash aswell I’m thinking would it be worth getting another ecu to make sure it’s not that but it’s reading the ecu
  13. pete12345

    P38A Abs ecu

    Tried recording that didn’t work but took car for a short run and abs seems to be working ok so any suggestions be helpful now thanks in advance
  14. pete12345

    P38A Abs ecu

    Cheers so it will record live data from the abs ecu the
  15. pete12345

    P38A Abs ecu

    Going to run it up the rd today see I’ve the abs is actually working or not with nanocom plugged in see I’ve I can get live data from the abs fingers crossed it may point me in the right direction once I work out how to record it
  16. pete12345

    P38A Mystery connector

    I’ve got on mine 4.6 but my alarm sounder is disconnected
  17. pete12345

    ABS fault with no fault codes

    I’m going to try that on mine tomorrow or day after when the road outstation is quiet
  18. pete12345

    2003 4.4 HSE alarm woes

    It cost him £150 so still cheaper than the main dealer
  19. pete12345

    Sh**e

    Mabey someone wanted a good half either front or back lol
Back
Top