Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. pete12345

    P38A Heater

    Been like that all day here data hissing down
  2. pete12345

    P38A Heater

    That’s what I was thinking just still wondering why left is hot but right stays cold as posted before blend motors are all new
  3. pete12345

    P38A Heater

    Done that went from low to high a couple of times they changed from 100 to 0 and back up again a couple of times no problems
  4. pete12345

    P38A Heater

    Will do thanks just drying off and a warm up then go and check
  5. pete12345

    P38A Quick eas question.

    Good luck
  6. pete12345

    P38A Heater

    I didn’t change the temperature much just little to see I’ve they moved
  7. pete12345

    Wiring connectors help

    Think they been added they not on mine
  8. pete12345

    P38A Heater

    Pics changed values
  9. pete12345

    P38A Heater

    I did that you can see in two of the pics the blend motor numbers are different + they change when I push the auto button
  10. pete12345

    P38A Heater

    Got some live data I’ve it means anything to you Kermit just a load of digits to me
  11. pete12345

    Wiring connectors help

    The blue ones don’t ring a bell where abouts on the car are you working
  12. pete12345

    P38A Quick eas question.

    One you fit new ones you have to calibrate again
  13. pete12345

    P38A Heater

    Cheers kermit
  14. pete12345

    P38A Heater

    That is when I’ve worked out how to do live data on the hevac
  15. pete12345

    P38A Heater

    I thought I could hear it moving I will try it on live data thanks
  16. pete12345

    P38A Heater

    The sarga continues nxt week got work for few nights now so no time
  17. pete12345

    P38A Heater

    Connected eventually calibrated still no joy blowing cold drivers side
  18. pete12345

    P38A Heater

    Will give it another try cheers
  19. pete12345

    P38A Heater

    Saying nanocom can’t connect to ecu
  20. pete12345

    P38A EAS Fault finding threads or files.

    You can do it with nanocom but its easier with blocks then use nanocom to read heights and save you can only increase or decrease a couple of bits at a time
Back
Top