Search results

:)cheers panza, that was very helpful. you do get quite attatched to these old smokers dont you.

hi guys, i am moving to nz and will be putting disco 2 td5 into a container with other chattles. i need to fill a SATEMENT OF COMPLIANCE form out for things ranging from door retention systems to front fog lights and they are asking about un/ece regulation numbers for each. does anyone have any...

Finally cured the M S limp home mode problem. Dodgy wire connection, the end that the gearbox selector switch plugs into. Nothing wrong with it now, dont know what i am going to do with my spare time

are these machines easy to use?

probably your gearbox selector switch, some people call it a xy switch, costs about 120 and 30 or 40 for someone to sling it on

its going into a 40ft container along with our household stuff, costing £4500 for the lot. Will have to clean inside and out completely and then MAF will steam clean again at other end whether it needs it or not. No mud, leaf or seed allowed at all. Cant remember what they charge the other end...

I seem to think that i have to get it done at both ends, a preliminary one here and a proper jobby over there. cheers big lad

Going for good, I also need to sort out a certificate of compliance for the vehicle so the kiwis can let it in.

Cheers Big Lad, its coming to NZ with me so the summer option looks favourite.

what is the best option for engine oil on my td5, i have been told 5/40 fully synthetic

hi guys, how easy is it to change pads on this disco and maybe discs also on the rear, will i need any specialist tools and should i use genuine parts or is there not any difference?

mine done that. cured it with a new fuel injector harness, its the oil running up the loom to the ecu, ithink, maybe

it has done it again

cheers panza, im pretty sure the batterey is sweet as a nut. when i had the switch changed the mechanic said the bit it plugged into was in bad condition and he put a cablble tie on it to pull it together. it did it less often after this. it also went on the diagnostic thing and said it was the...

i thought it had cured it but it still does it but less often. it seeemed to only do it when the roads were wet. a land rover that dont like the wet is not a good thing me thinks. on saying that it done it today in the dry.

?

i had a gear selector switch fitted, some of you call this a xy switch i think, but ithink i may need a new piece of electric cable that this plugs into as it was not in great condition when the new bit was fitted. does any body know how long, how far it goes and how easy it is to fit or even...

I bit the bullet and took the beast to be diagnostisized. This was for limp home mode M S flashing thing. there was a bit of a list of errors, he reset computer and I will take it back after it has done the flashing thing again. 30 quid. will let interested parties know results

i would put a line of masking tape from front to back,just above the position that you want it. use a degreasing agent on bodywork. peel off the back stick on making sure it is centred.

Agree with headtester, mine was intermittent, changed it and then fine.