Search results

Mike... I will re-check the oil level and make sure it's not over full. When original LR pump was fitted, I had the injector fault code, but yes as the replacement pump is not LR I cannot rule out having to replace it. I've ordered HP fuel pump regulator repair o ring and will see if it helps...

Skinny Mike... Thanks for comment. Yep, have tried that, and also cleaned MAF with crc mass airflow cleaner just in case. Also cleaned Air Temp Sensor on intake hose.

guineafowl21... Thanks for reply to scan results. New fuel pump is not genuine LR. Initial p0263 code existed when original LR pump was installed, and again with replacement aftermarket pump. When engine is on idle, and I unplug injectors one by one, all run noticeably worse including injector...

guineafowl21.. sure is typical garage response. Scanner results with engine warmed up and sitting at idle.. .

Nodge68... thanks for reply. I asked local garage who fitted injector for me if cylinder had compression problem, and they said not to their knowledge. However, I obviously may need to have this investigated further. guineafowl21.. thanks for reply. Recon injector was from British Turbo Parts...

Hi, My 2004 TD4 HSE (80.000mls) recently began suffering from vibration felt thru steering wheel and seat on idle and choppy revs between 750-2000rpm. The first thing I done was to check for hose leaks, including vacuum leaks. No vacuum leaks found, but intercooler hose leak found, which I...

Found the part number for hoses, but comes as a complete set only (JHB000160 @ £110+). Local motor factor stocked required hose diameter, so all good now for a fiver.

Over the past few days my 2004 TD4 has been losing coolant rapidly. I have found the source of the main leak, and a second source that is about to spring a leak. I have phoned around the local boneyards to see if they had any TD4's that I could get replacements from, but no luck. Would be great...

I know the original post is a bit old now, but I have just ordered the aluminium in line thermostat mod from "specialistcomponents" on the bay for £58. I ordered the one with 33mm outlets on both ends that includes 88c thermostat, which they specify is for the TD4. I assume the hardest part...

I'm very late introducing myself as I joined the forum in 2014 when I bought a 2nd hand Freelander 1 TD4 2004. I have always found members posts very informative, although I have never posted any comments until now. I feel that my thanks to forum members and admin is well overdue.