Search results

You can do it a couple of ways - 1. Take the wiring from the speaker connector to the door harness to main harness connectors, and from there to the head unit or amplifier. 2. Take the wiring from the speaker connector, direct to the head unit or amplifier, bypassing the door harness to main...

Yes, I have that type as well - (sorry for the bad pictures) .

Does it have this type of connector on it? - If so, yes, I have those - I can supply them, as pictured above - or, pre-crimped and assembled to a twisted-pair of cables, which can have the door harness to main harness connector terminals on the other end. If they have the other type of...

There are different door harnesses for different spec. vehicles. Have a look at the different options, here - http://new.lrcat.com/#!/1232/36532/36727/2788/36758 Rather than hunting around for the correct rear door harnesses, it's probably easier to add the additional wiring. Depending on...

The smaller dash clips (callout 3) were part number AFU2813, which has been superseded by part number AAU7273L http://www.rimmerbros.co.uk/Item--i-AAU7273L The radio panel clips (callout 2 above, and callout 15 below) are part number AFU1897...

The D2 wiper assembly has superseded the D1 wiper assembly. They are identical, except for the connector. If using a D2 assembly on a D1, you have to use the adaptor harness YMQ104550 http://www.paddockspares.com/ymq104550-harness-link.html It's a bit cheaper on eBay -...

Most of the Discovery-2 switches don't latch - they momentarily switch a wire from the BCU to earth, which signals it to start or stop a function, i.e. - heated windscreen, heated rear window, front and rear fog lamps. The only latching, live-switching, on-off switches are the cruise control...

Aux battery cradle, here - http://www.ebay.co.uk/itm/Discovery-Td5-Aux-2nd-Battery-Tray-NEW-REVISED-SIZE-TO-SUIT-LONGER-BATTERIES-/152038744976 What function do want to use the additional switches for? .

Autosparks sell a replacement connector, complete with terminals - http://www.autosparks.co.uk/electrical-components/plugs-connectors/automotive-plugs/hazard-warning-switch-plug-complete-with-terminals.html They also sell the terminals individually -...

If you're using the fuse box (PRC4826) and fuse panel (AMR3138) pictured above - then, the relays are mounted in 5 x interlocking relay bases, which are screwed to the bottom of the fuse panel, as pictured above. The flasher relay and wiper delay relay (if fitted) mount to 2 x relay bases the...

PM me your email address, and I'll send you the pdf of the Defender 2002 Electrical Library, which contains the connector details. .

I have them, PM me if interested ;) .

I was going to post and tell you that it's where the AirCon harness connects to the main harness (C0786) - but, you've already discovered that :D If you don't have AirCon fitted, the wiring in that connector can be utilised for other things. Terminal 1 - Brown/Slate - Permanent Live, from Fuse...

The timing function is performed by the BCU .

The dash switch is a non-latching momentary switch, which switches a wire from the BCU to earth. This signals the BCU to switch the heated windscreen relay's coil to earth, which it does for the timed period. During the timed period, the BCU supplies a live to pin 5 of the dash switch, in...

Land Rover make an interface harness (STC1825) for fitting the later Discovery-1/Discovery-2 rear wiper motor into a pre-1994 Discovery-1 STC1825 has all the connectors that you're looking for - but, at a stupid price - almost £100 :eek: http://www.rimmerbros.co.uk/Item--i-STC1825 I've got...

I sell Land Rover connectors, and have a pretty good idea of who sells what I don't :) .

The connector you need, is an Econoseal 4-way female connector - http://www.polevolt.co.uk/acatalog/info_ESC4F.html .

It looks like they're no longer in business - the domain name is now unregistered. Fortunately, I downloaded their pictures - I've now put them up on my PhotoBucket account. .

The round multi-pin connector is for a CD changer. The Brown 5-way connector (with only 2 x wires) is for a heated seat. .