Search results

Head to here: Home | TOPIx Accept the cookies and if prompted tell them your location, then select option for "browse topix without registering". Should work, but if not, clear your cache and try again, stating you are in the UK ;)

Section 44 - 55 on here shows where that extension cable should sit between NS footwell and the white plug you've identified. http://topix.landrover.jlrext.com/topix/content/document/view?id=70805&groupId=1662

These ones? VUB500870 The white socket you have should connect to the switch by your right knee and to a feed on the back of the instrument panel (black connector, top left at the back of the instrument panel) From your white plug, there should be an extension loom for RHD cars that has a...

You can get Recaro custom mounts for the Freelander (post 10/2000) from Germany but they are £180 per side, plus the cost of a seat (405mm x 275mm centres on the mounts, so not just Recaro fit them). The pre 2000 ones aren't in stock anywhere as far as I can see. Others have modified the...

It says "Race". How much faster is it now, mister? Good for another 30hp? ;)

Took intercooler out and gave it a bloody good clean today. Made a start on fitting driving lamps.

bent coat hanger and a dentist mirror? May help you get the connectors.

:cool: Thanks for updating.

Limited by transverse layout. The KV6 Honda based 2.5 is the largest stock - perhaps the Volvo 3.2 I6?

Exploded diagram with part numbers here: Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER

DCP3892L CALIPER CARRIER BOLT This one?

I've got a Pela Pump but it doesn't like working on its side. If I had enough clearance (Ramps or pit) I could have done it in about 3 minutes. Modifying the barn to include ramps is on the agenda.....

Replaced the auxiliary tensioner as the original one was toast, then changed oils on the IRD (75/90) and rear diff (80/90). Using a small hand pump and some aquarium hose it took bloody ages to get the rear diff drained - it was minging too. Also put some spring assisters in at the rear, as...

Chris, do you still have the EGR fitted? If so it's worth blocking the actuator pipe to disable it and see if that solves the problem. Longer term you may want to remove the EGR entirely and replace with a pass through pipe.

Where are you based Kieran? I'm in Dorset and have a commercial floor in my barn that I will be using as a template as I want to make up a partial floor bed for the front of the load bed. If you're in the S/W you're welcome to pop by and take your own template from it.

As a friendly Land Rover parts manager once advised me: "Al, if you think your D3 costs a lot to maintain, you REALLY don't want a P38 - they're a frigging nightmare!"

Common problem on Freelander and always NS caliper first. You can get replacement slide pins for under £10 if the caliper itself is still retracting ok.

:cool:

Good work Mad Hat Man :cool:

I got some from Matford Land Rover a couple of months ago - plan on fitting them over Christmas. If you're quick there's a ridiculously cheap set on ebay. FREELANDER LONG RANGE LAMP SPOT LAMP KIT, GENUINE & NEW IN BOX #VUB500870 2004 | eBay Worth buying for the switch and wiring loom alone!