Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Vagabondrobb

    Disco 2 Engine swap, can't get into gear

    So my injector seals finally arrived allowing me to complete my TD5 engine swap. She fired up and sounds pretty damn good... Unfortunately I am unable to put her in gear, so I must have messed something up! I can start her up in 1st gear and she will lurch forward, but once the engine is...
  2. Vagabondrobb

    Installing new engine - first time!

    I used a 1/2” drive extension - the bigger end fitted perfectly into the spigot, then wrapped some duct tape around its length to get the clutch nice and snug. Like a dream!
  3. Vagabondrobb

    Rust deposits behind oil cooler - advice

    If I stick the hose in at the top water comes out of the three holes where the oil cooler sits
  4. Vagabondrobb

    Rust deposits behind oil cooler - advice

    Water comes out clear funnily enough, but I think whatever’s inside has hardened. I’ve ordered some engine descaler to soak in for a few days. Annoying as I was ready to drop the engine in today!
  5. Vagabondrobb

    Rust deposits behind oil cooler - advice

    “New” engine arrived yesterday and found this - thick layer of rusty deposits. It was actually worse than this - I made a brief attempt to remove a little of it. My guess is previous owner used water to instead of coolant, but the pictures of the engine I looked at before I purchased didn’t...
  6. Vagabondrobb

    Installing new engine - first time!

    Excellent. So just find a long socket that fits nice and snug? Thanks guys!
  7. Vagabondrobb

    Installing new engine - first time!

    Clutch and DMF are only a year old, so will be leaving those. Just getting the ancillaries on today, waiting for my clutch alignment tool to arrive. Anyone mange to fit a clutch without one? I imagine its easier with engine out?
  8. Vagabondrobb

    Installing new engine - first time!

    Hey guys, so I have a 2nd hand TD5 arriving tomorrow to replace my original, which I’ve removed. I’ve got a clutch alignment tool as the clutch/flywheel came out with the old engine, and I’ve stripped all the ancillaries ready to be transplanted, and purchased new gaskets etc. Engine is 10p...
  9. Vagabondrobb

    High range popping out

    Haven’t had a chance to look at it yet - it’s stuck in high range and doesn’t seem to be wanting to come out, and as I’m only using her for pulling trailer about on our land it doesn’t feel urgent anymore. Actually thinking I might just get her in the barn and take the plunge (the big engine...
  10. Vagabondrobb

    High range popping out

    A little update - the hi/low stick has gone floppy, so can assume the linkage has gone!
  11. Vagabondrobb

    High range popping out

    Wow - never heard of this!
  12. Vagabondrobb

    High range popping out

    Thanks - will have a look! Re low range: hi range wasn’t giving me the torque I needed to force her forwards/back in the rut - I wanted space to lay some tracks in the ground for traction, which worked fine, but it was a matter of out of the frying pan and into the fire.
  13. Vagabondrobb

    High range popping out

    I got stuck in some boggy ground in one of my fields the other day - a lot of angry revving in low range trying to get her free before my neighbour effortlessly pulled me out with his lovely tractor. Parked up over night, this morning went to drive into town but seems she can’t stay in high...
  14. Vagabondrobb

    Disco 2 starting issue,

    Could try a new fuel filter - a Mahle or Bosch. Cheap ones can cause problems (I’ve heard). Also does it start ok on a full or 3/4 full tank? If so could be air bleed valve, which sits inside the front left connector on the fuel filter housing, looks like this: Found on inside of front left...
  15. Vagabondrobb

    Disco 2 Is this the end of my disco?

    I'm looking for a trailer, could be front wheels only... depending on what I get hold of. But regarding props, that's very good advice and something which I might have overlooked, thankyou!
  16. Vagabondrobb

    Disco 2 Is this the end of my disco?

    I had AA recovery - they got me to Liverpool -70 miles from where I broke down. After 80 miles they charge 2.50 a mile so didn't fancy it - I was about 220 miles from home. At the time I was convinced it was fuel pump as I had one go in exactly the same circumstances years before in my previous...
  17. Vagabondrobb

    Disco 2 Is this the end of my disco?

    I used the old starter tick to get her down there from the side of the road! Didn't think to use low range though... that's good to remember. It's a clear run from -2 to the exit, so I reckon she can be pulled to -1 (where the ceiling is much higher) and then directly out. Just have to manouver...
  18. Vagabondrobb

    Disco 2 Is this the end of my disco?

    Annoyingly the flat is Liverpool city center... I was pretty sure the parking wardens wouldn't be very sympathetic to a 4x4 on axle stands! I think I can get my mates defender down to -1 and run a couple of long straps to -2! It will be fun!
  19. Vagabondrobb

    Disco 2 Is this the end of my disco?

    Good ideas. I'm planning on towing her to somewhere I can actually do whatever work is required - at the moment she's sat -2 floors in an underground car park! Getting her out is going to be fun!!
Back
Top