Search results

I got £150 for mine which I thought was a good price, good luck with the sale

Thanks doc, I'll have a look! Been looking at your rebuild thread... Gunna be a bit of a beast when it's done!

The worst rot on the bulkhead... There is a bit along the bottom of the drivers footwell too. Is it worth repairing or just bin it and replace it? I thought I would give it a chance and try to repair it but I'm not really sure! Any advice?

Do you mean you'll fit the transfer box for me ;-) Just joking! I'm rebuilding my Landy so probably will have a look inside the box anyway so that's not a problem, I see on your other thread you have two input gears, how much for both gears and the transfer box? I'm happy to arrange the...

Here is a bit of the rust on the bulkhead, I'm going to make a photobucket account to post the pictures so I can post more than one at a time

You can see my half hearted attempt at painting it with the outline of the snorkel! This is where it has got to so far! Everything forward of the bulkhead needs removing! The chassis is actually very solid except the outrigger, it's a little caked in mud/dirt from the past 25 years but I've wire...

Obviously had the seats out, roof off doors off etc, then my dad got back from work so gave me a hand removing the windscreen from a very rusty bulkhead (pictures to follow) and I also had a bit of extra time so I took out the seat box and finally the gearbox!

After spending a little time removing seized bolts (ended up with the grinder on a few) I removed the fuel tank and the rear tub using my new engine crane! Quite useful actually!

Here is a pic, albeit not a very good one, of how it started before the rebuild! It was originally a station wagon but I replaced the ridged roof with a smooth one and van sides so there were less rattles!

Hi All, relatively new to posting on here but I'm always looking round! Had my 90 for a while now but it needs a bit of work doing rot get it how I want it so I thought I'd rebuild it. Bought as a 2.5td but fairly recently converted to 300tdi, it needs a new bulkhead, a bit of welding on the LH...

Hi Sam, was it you selling the cross drilled input gear the other day? Might be interested in both!

Ive sent you a pm!

Mine has britpart shocks fitted by the previous owner, I'm going to replace them whilst I rebuild it anyway but they seem to have lasted ok!

Oh and I also fitted my MT tyres to my dads Landy!

Removed the seatbox, floor and transmission tunnel from mine before removing the gearbox!

Mine was standard when I bought it except for A/T tyres. Since then I've fitted a new engine, winch bumper with winch, M//T tyres, a new roof without sunroof, van sides instead of station wagon sides, snorkel and wading kit, and a roof rack! I've just started to rebuild it because it needs a bit...

Looks really good! I'm just rebuilding my 90 and I was going to paint it but i think I'll wrap it now! I imagine it will be easy with all of the panels completely off! Keep up the good work!

Stripped the rear tub off yesterday as part of my rebuild and today I've been making my new rear crossmember!

Are the axles 24 spline with discs? If so how much for the pair?

I'm in Axminster and always get my steel from quicks engineering in Kilmington! Good guys and they always seem cheap, they recently folded some steel into channel for me the other week!