Search results

#345100/1 Gusset sill RH/LH!

I don't know the part no. but it's a small corner bracket, plated on one face...seatbelt anchor maybe?

Thanks. Am I right in thinking the bottom corner of the seatbox and a bracket are fixed also through these two holes?

I've tried to attach a picture, hope it's worked. I tried to fit a rh sill channel (MWC1086) today, no problem with fixings to bulkhead but I'm unsure about fixings to the tub. Looking at my exploded view drawings, it says to use M6 bolts and a nut grip which, I assume fit in the slots in the...

Holiday security? Don't go to Turkey. If it's a beach holiday, make sure you sunbathe with a high velocity rifle and a high factor sun cream.

Ok, thanks J.

The 300tdi is from a Disco I believe...will that matter re the downpipe?

1985 90, fitted with 300tdi / LT77 box, disco rear axle: How do I go about getting a new exhaust system? Is there stuff off the shelf that will do the job or do I need to go custom made?

Hope it all goes well for the MOT. I've really enjoyed following your build and have appreciated your help too. I'm sure it will sail through!

I nipped in today and what a great show. Lots to see, plenty of trade stands and second hand parts and the car park was another show in itself. The perfect sized show I felt. Well done Malvern, plus, it's a lovely part of the country!

It's something I'm intending to do later down the line. I know what design I want. I've got the winch & winch tray already. Will be interested to see what answers you get and good luck! Be sure to keep us updated.

I fitted the rubber ones to the bulkhead but also modified the lever pivot points which gives extra closing force and added a strip of s/a foam on the back lower edge and sides of the flaps too. Can't say if it's worked as it's still sat in the workshop being rebuilt.

Pm'd! Cheers.

Thanks for the replies chaps. I'm more than keen to do it right, I just can't see where clips for the rear axle breather pipe are supposed to go!

As per title, is this ok to do; will it be acceptable for an MOT?

That painting looks the mutts! What process do you go through from prep to finished to achieve that if you don't mind explaining please :)

As already said - both! Disclock won't damage your steering wheel; I've got one on my other car which has an alcantara wheel and it doesn't mark it at all.

Have you considered a Raptor Engineering console?

1985 Land Rover 90 Truck Cab: I'm in the midst of refurbing the tub. I have removed the Striker Lock (Item 1 on the attached drawing) and the round pin was really badly slotted. Replacements were £45 each! So I've made some new pins on the lathe so that's saved me at least £90 :) When I took...

Thanks for the replies guys. I don't think it's worth the risk to be honest. Oh well, time to get covered in brake fluid!