Search results

The undertray is held on by 4 bolts at the rear ( two each side) and two bolts at the front (one each side)

What are you on about, you knob.

My FL1 passed its MOT on 3/7/19, no advisories, running great, done quite a bit of work on it. Maybe looking to sell it in near future. Will post details and pics if I decide to sell.

I used the underlay that you get for wooden flooring. It is impervious to water, very light and deadens some sound, it is also cheap. I used it with double sided tape from B and M.

Mmmm but why was the centre prop removed?

Have you considered putting a back up thermostat in the top hose. It is a recognised fix and is so easy to do. It is well documented on here with plenty of good pics. I did it recently and it works great.

Send your address to :- [email protected], I don’t think you can get them separate as they come as part of the headlight unit. Use a touch of Vaseline on them when fitting.

Got these sitting here that you can have for free if any good to you.

I recently bought a second hand headlight unit for my FL 1 off eBay, cost 56 quid and had all bulbs fitted, just had to plug and play. There are lots of FL 1s on eBay being broken for parts, give one of them a ring.

Ha ha ha, how we laughed over your comment about the sun hardening the rubber. We live in Scotland FFS!

Took mine off ages ago to rub down the brake light stem and repaint, there was a load of wet leaves and mud up the back of the wheel holder, so left it off. No more leaves and mud.

Engine tray fitted today, bit fiddly but nothing major.

Checked the gear box oil level that I changed couple of weeks ago, put a drop more in. Changed the IRD oil, it was like black mud and I’m sure it is the first time it has been changed in 107 thousand miles, something else the previous owner never did. After the struggle putting the oil in the...

Couldn’t repair the front nearside indicator and ended up having to buy a second hand unit which arrived with all bulbs fitted, wired it up and everything is working again.

I was trying to take off the wrong bolts! The one that is horizontal instead of vertical, in fact I had to take out two. Waiting for headlight unit to be delivered. Battery clamp fell to bits, so had to replace that. There was a clump of gaffer tape behind the lower spots and I found these two...

Thanks for your reply. Am I trying to get off the two correct bolts? These are the ones that are up through the access panel, one on each side of the car. If these are the ones, there is just not enough head on the bolt to get a grip on.

Just spent hours trying to remove the front bumper to take out a headlight unit. Had to cut most of the screws. The two bolts that hold it to car frame are proving impossible to remove. I am in the insane position of possibly having to scrap my car because of an indicator bulb. All I want to do...

What is the point of a bench test if no one knows what the results should be?

Lots of covers advertised are total sh***, I was looking for replacement leather ones.

I was looking for replacement covers for the front two seats on my three door. Have you sourced any? Regards John