Search results

NOISE!!!! and the word Freelander =£$£$£$£$£$ but not the Freelander one. Your problem fixing it yourself sounds like a $100 fix

Hi There, Now that you have a spare Hadlex, Have a look at this video as it will go a long way in explaining the problem and ways of possibly fixing it. He also sells or can service any bits you cant.

In my experience with the prop off the Freelander 1, Its best to keep one wheel on the road and welly it to keep it moving if forced into the verge. I wouldn't be parking on wet grass if I were you.

That's one of the reasons Bell Engineering had to scrap my Haldex as some Grease Monkey in the past had used an impact drive to do the nut up so tight it cracked the case leading to lose of oil so the discs ground to a paste and destroyed the Haldex.

I disconnect/reconnect the battery and see if you can either pair the phone to the car or the car to the phone, Mine failed and I haven't got round to following the threads on the freel2 forum yet https://www.freel2.com/forum/topic11565.html?highlight=bluetooth+module

I had a recon diff sent to me when I had my Freelander 1 and a local garage fitted which was expensive (£700ish I seem to remember) I guess if you can do the work your self it would save a bit

If they are missing then there is an awful reason why they are missing

I think you will need to wait for @Nodge68 to get home from work for this one

I had this issue on my old F1, Water was dripping down the inside of the rear windows and collecting in the spare wheel well. Then the alarm kept going off all night because on wet days the water was creeping along the head lining and shorting the rear passenger interior light and setting the...

If you live in the Midlands then book a session with Bell Engineering, They will be able to tell you what's wrong with it.

Something similar happened to me on my Freelander 2 (What is your car?) , I was told by a so called Specialist that the wish bones needed replaced at great expense and that did not solve the issue. Took it somewhere else and they replaced front rotors & brake pads and told me one of the calipers...

From memory I think so I am welding right now so can’t get the manual out to will check later, what’s the issue with it anyway??

In the boot behind a panel

I know but I was reading this forum and read that version has the most functionality and read somewhere else that version may work best with my 2007 Freelander. I am happy to use V160 if it can read Haldex computer and tell me which one of my Parking sensors is furbar

Hello there, The download link is broken, Would you be able to check it please?

Hello everyone, I have a bit of down time for an update, So got a kit to replace the gubbins of the starter motor, Took starter off replaced gubbins which didn't seem all that worn to me, Put it all back together and nothing...Bought a new battery and nothing still... As I was mucking about with...

They get good reviews but in my experience it was one of those places non of the other land rovers was older than 5-6 years and I could see it on their faces “What! You want us to fix that ratty old Freelander!” He kept complaining about how he only uses genuine landrover parts and my car was...

Another update: So, I got a recon gearbox from Bell Engineering and found another so called “Independent Landover Specialist” To Fit a genuine land rover clutch plate, Dual mass fly wheel and clutch cylinder. I had the car transported there and left it with them. He did the work, and I went to...

I suppose it depends if A. They want the job B. They can charge what they want as you have no choice or C. Piracy...Everybody else is doing it so why cant we?

Yeah the Slave cylinder between the gearbox and engine has blown its seals, Pedal to the floor and brake fluid all over the road. Quotes around £1200 + VAT to fix