Search results

Hi, I think the only thing to change are the machanics that work on that car, not the parts. Does It try to start with brake cleaner ? Do you hear only the starter and the pulley like it’s running with no fuel ? Any code ?

Hi, One year ? Give a visit to the garage and ask them to fix as warranty ! Regards

I experienced all the issue from a leaking hp pump, a leaking fuel pipe and a dying injector. The smell of unburnt diesel is not very pleasant.🤢 A dying injector can give you issue starting when the engine is cold, and it will get worst when the weather is cold. You will also get an unstable...

Hi, You certaintly missed something. All fuilds are good and at the right level ? For the codes, if you try to start with an unpluged sensor, you will have the code no matter if you reconnect it again. Regards.

Hi, With the labor or only for the parts ? Regards

Hi, The more common cause of starting issue is a fuel leak on the HP pump or bad injectors. If the engine has a lot of hesitation when starting, and there is no fuel leak, so it's an injector issue ! Don't waist your time with the plugs, unless it's freezing outside you don't need them to...

Hi, The second injector should be changed. After that the car should start on the button. The fourth will be certaintly the next one to replace.

Hi, It’s only the obd connector. Just put it back in place. Regards

Hi, Certainly one bolt get loose. You are lucky that only the bracket is brocken. Regards.

Hi, Unfortunatly this fuel pipe comes with the fuel cooler… It’s not avaible seperatly. So need to buy a fuel pipe and adapt it. That fuel pipe plugs in the fuel sepator made of plastic that can break easily …

Hi, There is an official 12V socket kit that plug on the battery, It comes with the full harness and fitting instructions. STC50468 Regards.

Hi look here : http://legionlandrover.com/index.php?sec=31&id=9&tipo=Freelander It’s in multi language : Freelander 1 - Manual De Instalacion De Accesorios.pdf 43.3 MB Hope It helps.

Hi, You will pay for almost 6 hours of labour, once the clutch bell opened, it will not take to change the plate … For me, the more important is to change the master cylinder, if it haven’t been changed.

Hi The clutch slave is certaintly leaking fluid ... yes sometime it fails even if it's a genuine for no reason ... Need to open the clutch just to change it, good luck. Open the clutch fluid bottle, to check the fluid level, top it, close it, hit the clutch pedal, you will see if you loose...

Hi, Just put a master / slave from LUK, avoid cheap crap that doesn't last more than 6 months. Regards

Hi, Here the OEM parts numbers : PQS101300L PQS000180

What have been stripped on the car ? certainly you missed something ?

Your battery can be certaintly flat after that time.

Hi, White smoke can be a bad injector or a dying fuel pump, it's certainly smells diesel. You will certainly need to do a leak back test on the injectors, and check the fuel pump for any leak. Regards.

Hi, If the battery was disconnected for almost 2 mounths, it's certainly dead. Regards.