Search results

Thanks for that. Today picking my daughter up from school I parked the car rear wheel all over the place on 4x4 screen. Came back 20 mins later front end down to access height rear ok. Could the car register a fault with the height sensor and when I switch off it knows it wasn't level try and...

Not as yet trying to gather as much info as I can when then issues happen and what happens. Currently saving for a diagnostic reader

I mean the wheel display on the 4x4 info screen. As above the front dropped again but this was after I had parked and the compressor kicked in and the back wheel was moving about(on the 4x4 screen) I don't understand why the front drops if the cause is the height sensor at the rear. To me this...

I've cycled through from access to off-road when I've been parked and the tyre is bouncing and it doesn't seem to move other than normal height. Also when I park the tyre in question is bouncing and the compressor kicks in to adjust sometimes it stops and starts due to the erratic tyre (my theory)

So I think I've ruled out the front valve block. I had a check around for leaks to no avail checked the fuse etc and just ensured all was seated correctly. Since then the front hasn't dropped as it did. I did notice that if I had my foot on the brake and indicated right the rear fog light would...

Would a single sensor (rear left) cause the front to drop? As the rear is high and front is low in the mornings I park on a slight hill facing down. The rear sensor bounces a bit when parked but when moving on a even road I've seen it really high and low on the 4x4 screen

No no other work done. Car was fine for 3 weeks pulled the fuse earlier about 2 hours ago just been out and both sides have dropped at the front. Going to have a good look around the compressor and struts tomorrow leaning toward front valve block due to front dropping as it is. Think the...

So after getting a new compressor fitted 3 weeks ago and all being ok I now have more issues. I noticed the rear passenger side tyre bouncing around on the 4x4 screen going quite low and high and I got a suspension error normal height only error. Now when I park the car and lock it within an...

Turns out it was disturbed wiring all good now

Yes new relay. Just returned from the garage who hadn't had time to look at it and will keep it overnight so they can get on it first thing tomorrow. One of them said the main mechanic has been in conversation on a forum (doesn't build me with confidence) and they reckon it's because it's not a...

Yeah D3 it was replaced with a like for like arnott compressor. Does the eas need re activating or calibrating after fitting. Thanks

I wasn't getting an instant suspension error prior to taking the car in they told me they could replace the compressor having picked the car up I cannot do anything with the new compressor fitted instant fault special programs not available and unable to higher or lower and the red suspension...

Can anyone shed some light on my issue please. Yesterday had a new compressor fitted due to old one filling to slowly went to collect the car yesterday and it had a suspension fault special programs not available also 30 mph bong. Took car back to garage this morning and they are inspecting it...

Still not got to the bottom of this due to not being well (covid) I've checked for leaks around the car with a washing up liquid solution and spray bottle but nothing untoward that I can see. The issue can come on one day and the car is fine for a few days then it will come back. Things I've...

Really appreciate that thank you. Do I just click on your profile and select start conversation to private message you?

Yeah the clip is approx 15mm attached pics show complete on one side and missing clip on other side

Would some epoxy putty placed over the cable connector and ball connector hold? Don't usually sit or out weight on the tailgate

I was away at a caravan I think it was knocked when unloading the car. Searched every blade of grass haha. Going to have a look at it tomorrow don't want to replace the whole cable as its fine. Wonder if I bought a cable I could ease of the clip and fix it to the existing one.

Discovery 3

Hi all. I have an issue with a lower tailgate support cable. The cable itself is fine but where it connects to a metal ball connection it keeps slipping off and retracting back in. This is only on one side and on inspection it looks like something is missing from the connector. Anyone else had a...