Search results

Hi There MG Mayo, Yep I can see how yours is a simplified method. if you used a timer relay - mentioned in my posts it works when hot and also gives extra cold start assistance for the amount of time you preset it to all without holding the button. Yours is by far the cheaper option though.

Here Here - love mine too -

I have had similar symptoms to this and cured it by dropping the tank and cleaning a load of crud from the pick up filter - cost me nowt but an hour and a half on the floor

Hello Gents, I can highly recommend for the west Devon area James Tennant Landymoor Cowsen Lane Sourton Okehampton Devon EX20 4HY [email protected] Tel: 01837 861478

I really must agree with BBS coments - if you think a 20 year old P38 is expensive to run and fix try getting a 1996 jeep cherokee through its MOT without a cutting torch, or see what an alternator costs for an Isuzu trooper diesel, and then see what absolutely undrivable gear changes and...

Hi There, Do you get the gearbox fault message followed by the engine cutting out or does the engine cut out followed by the gearbox fault message? If its the second option the fault message is triggered by the gears being driven by the wheels but not the oil pump which is drven from the...

Hi Gents - if your landy is insured for 3 seats, it is not insured to carry passengers in the rear. However regardless of how many your landy is insured to carry it is illegal to carry passengers in the rear of a vehicle that does not have seats fitted - that would fall under the same category...

Hate to be the only dissenting voice but - I dropped the tank on mine to clean the filter on the pick up due to some poor fuel a couple of months ago - all done in an hour and a half - use new jubilee clips - cut off the old ones three bolts hold the tank up - the unions are held in by push fit...

Yes

They are called rivnuts - the size you need are M6 - you knock the old ones into the cross member using a punch and fish them out the ends. To fit new ones either buy the tool or use a longer bolt with a couple of nuts on winding them to compress the rivet part of the nut - they work in a...

£20 quid and its yours

LZ courier is a possibility, we are not far from Okehampton just off the A30

The postage would be way high -couriers etc, unless you know someone on holiday in Cornwall, as they would have to go past us to get home.

Hi Mudpie, My boy has a 10 spline diff sitting in the garage, prob is its in West Devon. He is open to offers though

Hi Gents, Just in case it helps - I had the same symptoms engine cutting out without pattern or reason usually several days /miles apart. In my case I dropped the tank to find the gauze filter on thr fuel pick up full of black sludge built up over the years - cleaned it out - no probs since...

Hi Gents, Hoping to find someone that has done it already..

Hell Gents, Does anyone know if the kick own on a 1996 P38 dse can be reprogrammed not to kick down above 65MPH - or when in Cruise - mine will kick down even at 80 in cruise if I hit a hill,I would rather the bloody thing slow down a couple of klicks, but no she kicks down and screams its tits...

if you rip the crosshead out of the retaining screwdon't drill out the head, simply use a center punch on the outer edge to punch it round until loose. once out saw a slot in the top to put it back if you haven't a replacement.

cheers rewmer - any idea how long it takes for the bits to arrive

Hi Gents, Could any one let me know where the best deal is currently on an EAS piston, & liner replacement, there is guy on ebay doing the piston, and seperately offering the liner with a piston seal, what I need is a piston and a liner no extra seal. Cheers