Search results

I remembered that I had an extra accumulator. So I installed it, pump ran for about 30 seconds cut off. TC and Brake like went off immediately. With ignition still on each time I depress the brake the pump runs for 2 or 3 seconds. Accumulator came off my old pump.

Got it!

Do you think my pressure switch is okay?

Got it much appreciated!

Well I'll try to source an accumulator. Thanks,

Hello all, I bled the vehicle following RAVE. I turn on the ignition, TC and Brake lights comes on and goes off as they should. While the ignition is still on each time I depress the brake, the pump runs for a second and the TC and Brake lights flash on but goes off immediately. My question is...

Correct, the bottom nipple is for bleeding the master itself, the 2 upper ones are for bleeding the Master for the front calipers and Rear calipers. Top short one is front-master and the Top long nipple is for bleeding the rears.

Just so I'm on the same page, the 2 nipples (Short one is the Front and the long one is the Rear) are for bleeding the master fro t and rear. I will flush 3 litres through them and then Repeat RAVE Bleeding Method. Good hear from you! By the way, you td me to call you something other than...

Will do! Have to go out for a bit first

Are you saying to just repeat the Rave bleeding method again? That's the message I was getting then Forwarded to another site.

Glad to hear from you! Something or someone was trying to hijack the landyzone site over here forwarding all logins to another site location and wouldn't allow me access all day yesterday. Just wanted to make everyone aware. When turn on the ignition the lights come on momentarily as they...

Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave...

Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave...

Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave...

Well, I have it all back together. I used a Power Bleeder 1st following British Atlantic YouTube then bled with Power Bleeder according to Rave. You all said it was a pain to get air out of modulator so I used Power Bleeder 1st. Next I Bled the system without power bleeder according to Rave...

Hey everyone just wanted to let you know this is the weekend I can get back to installing the modulator. Holidays and weather slowed me down! Hope all is well with all of you.

Got it! Grrrrr got a little excited!!!!! Lol It's great interacting with all if you!!!

It has a flatened/pressed plastic I guess you'd could call it an outlet (see right side of attached pic).

Cool to know! Still learning!!