Search results

Hi, I disconnected Rear Lefthand Sensor, and that fault showed up, so that should prove im talking to the EAS. So i will clean the connections, on these other two sensors and see what happens, why cant i use WD40? Colin

Hi, Yes USB to serial adaptor, Windows XP. When it shows Green Good idle, doesnt that ensure im connected, had to change to comm 2 to get it scrolling, when i do press Unlock EAS, i did see flicker of the STATUS to red then go back to GOOD IDLE (Green). Colin

Hi, When i press Unlock EAS, nothing shows up, that anything as happened. I have tried what you said, and i still have my two faults, 6, RR No signal was the air bag which had split, 2, FR No Signal, which i havent touch the front bags, so i why i have a problem with this sensor...

Hi, Cleared faults, then re-read them, getting, faults 2. FR signal incorrect, 6.RR signal incorrect, 7. Vehicle has moved. I will clean connections, 2 and 6, dont know what 7 means, is it because im sat in it? Colin

Hi, I have Status= Good idle (Green) the rolling numbers are the two columns Tx and Rx. Colin

Hi, Im sat in my car using RSW Soultions software to remove EAS faults, i have had software running, but it just goes on forever, do these numbers ever stop rolling. Can anyone just give a brief step by step guide of what im looking at. And what i need to do to remove this EAS fault. Colin

Hi, Yes sorted now! Thanks! Ive been so lucky, both bottom clips broken but bag came out of bracket, top clips just pull out with hook bar (made at work) and molegrips. God knows how awkward the job would have been if these had broke. Colin (thanks again)

Hi Everyone! I ve just come in from my driveway to post this, im in the process of replacing rear airbags. I have removed clips top and bottom of rear drivers side, removed pipe. So expecting the top to just fall out (like the bottom) It hasnt and just wont move, tried a prying bar up turret...

Hi, Im going to inflate my bags individually with my compressor, this will check my bags for leaks, i will check righthand sensors blow out and clean connections, then re-done my EAS fault check, se what i get. I had been driving throught water down lane were i live so this fault makes some...

Hi, I havent tried EAS software tonight tonight, been reading other threads, when i did connect Tuesday, i had good idle numbers increasing in Tx column, and similar in the other column but alongside the numbers i had FF. Now if im understanding old threads i should have just FF in this...

Hi, Well just trying to understand it, just thought if i had cleared the fault using the software, it would go through it cycle of raising the car until it read the fault again. So do you have any advice regarding sensor, clean the terminals,blow it with compress air to get water out, or...

Hi, I have cleared faults, switched off ignition, unplugged. then started car, still have EAS Fault, and all four small lights flashing on dashboard. And my car isnt rising or compressor running. I thought it would have gone back to normal tried to raise the car then give the fault again. Colin

Hi, Sat in car right now, cleared that big list, then restarted still got good idle, and now have one fault (6.RR signal incorrect). Gone from loads, to just one expected just normal things (Offside bag got leak) colin

Hi, Finally got connection,good idle. But what am i looking at, have a big list of faults. My theory was to clear faults, including EAS FAULT, SLOW 35 MPH message. Start her up then read faults again then repair. colin

Hi. Watched some videos on YouTube (Comm settings) understand abit more, so might get connected tomorrow, i now know my comm-port number. Colin

Hi. Ok, i will have another go tomorrow night, i will try and get my head round it! Colin

Hi, Nothing happen until i tried comm 3, then these numbers started in Tx, just assumed i had sorted it. colin

Hi. Looked at Step by Step instructions file (WordPad) this looks like a computor program! Colin

Hi, Couldnt resist buying EAS cable and software from ebay, just thought worth a try. the problem is that, im a spanner bloke not computors, so a mate sorted it from disc to lap-top. Tonight i got it to connect (talk to car) but all that was happening was figures increasing in column Tx, this...

Hi, Thanks everyone for info. I have tried to register on the Lpgforum, but its not accepting my e-mail address, any suggestion regarding this, maybe a member could ask admin why this happening. Colin