Search results

Neither of them are 2.5 tdi like ad says. Theyre 2.5 td/19j i think Csws hold value better though. If I was you I'd check out the land rover forums selling sections as you'll probably find a better deal and more likely to have been looked after. If problems might find out rarther than a garage...

Making a mount to fit a factory air cleaner as it had a crap aftermarket one, not gana use the origional style bracket as 1 they're silly expensive and 2 I hear messing with the head bolts is a bad idea So my question was since I'm making a custom mount off the compressor mounting point over...

Did you use the textured paint they do? I think it's for lorry beds. What's the finish like? I saw one for sale before I got mine that had that, it put me off cos couldn't tell what was underneath whether just painted over the crap haha Looks tidy though

A 9/16 3/8 drive socket (heard quarter drive works too but it's a fair bit of torque for that size) socket fits fine on an extention bar and probably cheaper/you may have if you have any socket sets And a decent ring spanner goes a long way. Impact gun makes it so easy too. And I've been using...

2nd and 3rd on the top pics I showed is what I want, bet the like cubby console be expensive af though. Never tried leather wrapping but how hard can it be. Prolly try on door cards too cos got couple scratched ones look awesome in leather too. Just need ton of spray glue haha You should get...

Have you considered the masai ones? They look really good, not cheap though

He didn't use d3 one he used the defender tdci one to match bulkhead. You could use a similar custom housing to use the d3 hi low too I suppose. You can fit a d3 one but the hilow button obv useless. Could always blank off. Think the one I saw his hi low came out infront as D2 box in like a box...

I did disco box too to plus the heater works pretty well. Mines to a 300tdi engine so maybe easier. Gatso did a custom lever housing so he could use the tdci tunnel and levers without cutting seatbox. Think he had a pneumatic hi low lever. I just cut seatbox and made a custom gear tunnel and...

Prop twist can you see movement in the uj's? There shouldn't really be any slack in them and they can cause the clunking you speak of If not that try driving with either prop off in difflock see if still have problem, if only problem with one prop on then likely diff if problem with both still...

The teeth are pretty fine on them anyway, just thought it might be worth a try before you start drilling it! They usually go on the arm before the spindle

Use a multimeter to identify positively what wire is what and wiring diagrams. Then if I was you I'd use a peice of flexi con with some flex in. What I've used to make a new glowplug loom for mine. Flexi con and appropriate guage coloured and sleeved cable. Be a fraction of the price and just...

Easy if uou have the kit impossible without the kit thought. Talk to crazywabbit I think it is on lr4x4 site if you search on there there's a similar thread

Can you not just use some flex or multicore? And either replace the damaged section or wire it direct to the warning lights and fuel guage

Are you certain it's the spindle? Mine looked crap but when I changed the wiper arm it worked fine. The notches on the arm are softer than the spindle

Also if you intend to properly wade get the kit for axel and gearbox plus timing case breathers and some wading plugs. Make sure your crankcase is breathing into the turbo pipe too and not just hanging like mine was when got it

They're both water drains. I got a set of basically the whole thing (supposidly) for 75 quid. All pipes dump and filter. But it was missing the second section of the filter - turbo pipe so gota pay like 40 quid for new one of those... if I were you and having a snorkel I'd just go pirtek or...

The masai wrap around windows look awesome and very easy to fit. I'm tempted to turn mine from a van to a csw with them

I meant if you leave the dump and filter housing as you find them! Cos they suck

They're always shagged! Between that and the crap welds on the cleaner it's hard to get s good seal

Ariel like the mermaid? :D Has anyone fitted both roof and wingtop aerials for dab radio? Not sure where to put mine; heard wing gets crap reception?