Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. jamesmartin

    Help needed on drive issues

    if its leaking at front of box could well be a front bearing going hence the judder
  2. jamesmartin

    Possibly another Project

    its ok mate ,yes right kit and drums are the same
  3. jamesmartin

    R380 / LT230 gearing advice

    yes but that has nothing to do with altering t/box ratio, with the 1.2 box fitted in a defender you have the same ratios as disco but usually taller tyres,its the tyre were over gearing is going to occur
  4. jamesmartin

    R380 / LT230 gearing advice

    1.2 lt230 fitted to 300 tdi disco is the same as fitted to defender r380s are the same except the gear change,diff are the same only variant is tyre size,later q boxes are equivalent on both they just have finer teeth than tdi boxes
  5. jamesmartin

    Possibly another Project

    243744 x 2 243743 x 2 576973 drums rtc3417 shoe set
  6. jamesmartin

    Possibly another Project

    for what
  7. jamesmartin

    Possibly another Project

    yes 109 should have twin cylinders thats what gives the increased front effort,88 only after 1980
  8. jamesmartin

    R380 / LT230 gearing advice

    no r380 and the lt230 are same as fitted in manual disco so are the diffs so its only tyre size that might vary,defenders tend to run taller tyres so it ups the gearing as such
  9. jamesmartin

    R380 / LT230 gearing advice

    the only difference between the disco and defender would be the tyre size
  10. jamesmartin

    Head bolt stretch?

    compare them if they are all the same length they are ok
  11. jamesmartin

    Broke something Again

    cobalt drill bits,those threads are 14 unf iirc which is odd as it was usually coarse ie unc in castings
  12. jamesmartin

    Series 2 Gearbox numbering

    thats the adjuster the cast iron one is series 1 early series 2,there is only the 2 types
  13. jamesmartin

    Broke something Again

    grind it flat center punch it and drill it out with smaller drill than thread tap size
  14. jamesmartin

    Rear Output Shaft Removal

    no, shaft goes right through the box and has 2 gears secured with a difficult to get at circlip
  15. jamesmartin

    Which Engine

    3 bearing crank, blocks are duck egg blue unlike 5 brg which are red lead colour
  16. jamesmartin

    Which Engine

    2.25 3 brg
  17. jamesmartin

    Not a clue

    the pin wont drop down until the shaft below it hole lines up which happens when the red lever is pulled back and outer shaft behind the tin cover slides forward
  18. jamesmartin

    Help identifying axles

    its abs axle possibly defender td5 but all the later defender disco rrc axles are the same except the brakes and mud shields
  19. jamesmartin

    Help identifying axles

    have you a pic of the brakes,measure radius arm bracket width as well
Back
Top