Search results

North Devon

Hi Ogy. You have several threads asking all the same questions. As posted in your other thread, this link has all the answers and some options for fixing. https://www.landyzone.co.uk/land-rover/fuel-burning-heater-still-on-with-temperature-normal-solved.395532/

Here is how I did mine. https://www.landyzone.co.uk/land-rover/fuel-burning-heater-still-on-with-temperature-normal-solved.395532/

Fuel Burning Heater cutting in and out??

What else could you get that was that decent for 5k ?? It will give 10 years service.

https://www.ebay.co.uk/itm/326338139646?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=yBtC2XUxRpu&sssrc=4429486&ssuid=b5qQSb6hQNK&var=&widget_ver=artemis&media=COPY

The Honda device arrived. Stat accessible by unscrewing the unit. Small hole already in stat. It fits, just, between the T pieces on an Auto. Works fine and gauge and FBH now happy and presumably will work when needed now. Only minor problem might be removing engine oil filter cap. It looks...

Hi J. Was going to look at prop bearings next. VCU test was OK at last service in Spring. The thump is clearly a gear change but feels like it could be mid car for the noise. Thanks for the tip. Will drop prop off and see what happens. Also going to check out the engine mount at bottom of...

Yes thanks..can't see a matching pattern to the problem yet !!

Thanks. What gears were hard or was it all?? Have done 2 fluid changes with no change. It did have a cracked reverse piston which I replaced. Maybe burnt dust as it slipped for a while with the cracked piston.

So after extensive trials to identify exactly when the 'hard change' occurred, I conclude the following: Only when changing up. Only on 2 to 3 or 3 to 4 gear changes. Worse when cold. Not always present, sort of about 1 in 10 changes. Worse when not under power - so level ground and little power...

TD4 has a cast iron crank and they can fracture, particularly if an impact gun is used !! Or, in my case, you pull a trailer with 2 large ponies in !! Possibly :)

More likely hp fuel rail sensor wiring or connector?

Interestingly mine did. Only worked when cold.

This one is giving you the run around isn't it?!?! If it ran for a few seconds then we don't know if the pump will or won't cure the smoke issue. Is there any rail pressure when cranking?? You get these teasers once in a while. What I hate is when you solve it and only then, the answer is...

What are you going to do to the timing? It cannot be altered unless you have had the timing chain off !!??

Having downloaded the Jatco manuals and updates, has anyone got a diagram or list that shows which components operate in which gears ?? I have a TD4 auto here (wife's) that sometimes bangs into 3rd and sometimes doesn't. Most noticeable with gear change when not under much power. Not inclined...

Looks like weeping IRD to driveshaft seal is next !! 🤔

TRW Automotive was the eighth largest automotive supplier worldwide and the seventh-largest company in the Detroit Metro Area and had nearly 64,000 employees in 22 countries worldwide. In 2015, TRW Automotive was acquired by German ZF Friedrichshafen and subsequently renamed ZF TRW Automotive...

Sounds like a sticky ring as you suggest. Assume oil is on inside of plug. Oil can get onto outside with a gasket leak and then run down when unscrewed so check ! There is a product called Redex which cleans and debungs rings. Don't see any reason why you couldn't run a dose through. Anyone...