Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Shippers

    Reverse switch r380

    Did two recently found easier to crack of from underneath then remove from inside when cubbybox removed...neither were faulty when I checked with multimeter a squirt of lube and push the ball bearing in and out...also made up fly leads and bypassed switch to make sure it wasnt a wiring problem...
  2. Shippers

    After market replacements drums.

    Ehh a screw fitted at factory to hold drum to hub whilst moving down production line before wheel fitted whats that got to do with hub seals???...
  3. Shippers

    After market replacements drums.

    You dont need it it doesnt do anything...it can just be apita if you need to remove...
  4. Shippers

    After market replacements drums.

    The screws are to hold the drum on whilst on assembly line the third is so you can use a screw to help ease the drum off as the hub is threaded but the hub isnt but to be honest are not needed...
  5. Shippers

    |Where does this fit? series 3 swb 1983 88

    Seatbox cant remember end or middle under seat runners...
  6. Shippers

    Series 3 Radiator

    What year is it?...
  7. Shippers

    Sausage smuggling

    we are bloody lucky here in Algarve drive 20mins one way Waitrose/Iceland and 20 the other way Tesco both part of The British Food Co...
  8. Shippers

    P38A 97 P38 Gems - EAS issue which seems to have expanded

    How did you do battery drain test?...
  9. Shippers

    P38A 97 P38 Gems - EAS issue which seems to have expanded

    Headlamp wipers not seating properly?...
  10. Shippers

    Rhino roof rack - repaint

    Properly clean and sand surface then rattle can...
  11. Shippers

    P38A 97 P38 Gems - EAS issue which seems to have expanded

    If it does drain overnight and as you say the battery is new you need to do a battery drain test...
  12. Shippers

    I would just like to say

    Spent 2 days on and off fixing rear fogs on van they failed inspection amongst other bits and bobs...so pulled switch out cables are to short no plug on end to connect to switch bodged wires etc and wrong colour going to rear lights check with dmm all circuits on cluster ok then find a blue...
  13. Shippers

    Series 3 problems.

    The white wire from ign use dmm to check for 12v in position 2 dont start changing things work in sequence eliminate as you go...
  14. Shippers

    Series 3 problems.

    well use it to trace voltage and continuity.position 2 on ignition 12v at coil...
  15. Shippers

    Series 3 problems.

    If youv'e got 12v at coil with ignition on position 2 you are good to go...got a dmm?...
  16. Shippers

    Series 3 problems.

    Rotor or cap then possibly but could be also wrong coil...ballast resistor?...
  17. Shippers

    Series 3 problems.

    Ignition on 12v at coil?..
  18. Shippers

    Series 3 problems.

    Post over as ^^^...but as a pointer an ignition switch for petrol needs a wire to the coil when in position 2...
  19. Shippers

    I would just like to say

    HaHa..
  20. Shippers

    I would just like to say

    You bought her an Avon tyre and a cook book?!!...surprised it's not round your kneck and the book stuffed up where the sun dont shine...
Back
Top