Search results

This is the message

I've tried that before and didn't work unfortunately. I've tried disconnecting battery and leaving it overnight to try. It's strange because I can hear the cd changer when I put the key in but on the screen when you go to the override menu it states no power will upload a picture of the screen.

iPod it is then

Hi Any help please the L322 TD6 2005 audio has stopped working. I've checked the front fuse box and rear drivers fuses and relays and they're all ok. I've been told there is a fuse on a cable in the rear passenger side but can't for the life of me find it? The sat nav works fine and the screen...

Checked relays in the boot and gone through every single fuse there is, this is beyond me now

Seems to be electrical but don't know what else to do?

There is diesel at the injectors.

I've tried easy start and nothing it sounds like it's going to start then dies. Changed crank position sensor no change. There also isn't power going to the wiring loom for the injectors? Replaced the loom about three years ago. How would I know if it was ecu it states mobilised on hawkeye.

I have changed a couple of injectors about three years ago and remember it ran lumpy but can't say this time if it is the injector its run ok apart from when you switch off when the engine is hot. Leave it for 30 minutes and it started and run ok. Could it be the crankshaft position sensor? Or...

It's cranking but not running can I still do this?

Hi I have Range Rover L322 TD6, it has had the hot start problem which I haven't fixed. The problem is it won't start at all now. I've changed Battery Both intank and inline fuel pump Camshaft sensor Plugged into hawkeye and it states fuel pressure monitoring whilst starting. I can't do a...

Hi, does anyone have a Defender 110 15p engine block for sale?

Sorry for some reason the photos disappeared and I'm struggling to get them back.

Hi, I decided to strip a TD5 defender engine after finding oil in the water. Oil cooler definitely needs replacing but not sure about the marks on the block? Do I need a replacement block?