2081mm - should fit
but why is 2120mm also shown as fitting?
but why is 2120mm also shown as fitting?
P38A Oil loss at the engine
- Thread starter Frank_38
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ok, I looked wrong - so 2120mm after all
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,772
- Location
- Buckinghamshire, UK. ('95 DT)
Should be written on the belt, although might be eligible by now.
Good morning everyone,
Can someone please help me with the belt.
I can't turn the motor at the moment. I would like to order the belt.
The only thing I found is on the photo.
Why are there so many numbers?
I made a mistake - I have this setup:
Since I have the button in the car "air conditioning" I assume that the selection with air conditioning is correct but then there is again a distinction between air conditioning and without, hmm. Thanks!!!
Can someone please help me with the belt.
I can't turn the motor at the moment. I would like to order the belt.
The only thing I found is on the photo.
Why are there so many numbers?
I made a mistake - I have this setup:
Since I have the button in the car "air conditioning" I assume that the selection with air conditioning is correct but then there is again a distinction between air conditioning and without, hmm. Thanks!!!
Attachments
- Posts
- 13,258
- Location
- Sud ouest France !
You can cut the old belt off and measure it end to end. Then you'll know the size 
- Posts
- 1,691
- Location
- Buckinghamshire.
Had Dayco on mine for years, been fine. They're OEM suppliers for Ferrari apparently.... I'm not sure if that makes you feel better or worse!
