Correct coolant for a 1999/T P38 (Thor)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ok, i'll fill it with water. Does it have to be distilled water or water from the tap?

and another thing, is there no sensor in the display - if there is no water?
 
No harm will come by using the Mannol. If you can get that, than use that.
As long as it will mix with what is in there without turning to jelly.
I'd just top up with distilled water until the problem is sorted then drain ad refill with any antifreeze approved for alloy engines which is almost all.
Anti freeze should be changed regularly anyway.
 
am i doing something wrong if i order the mannol? That is the best available.
Ive been using Liqui Moly KFS12. That should be available pretty much anywhere.
ok, i'll fill it with water. Does it have to be distilled water or water from the tap?

and another thing, is there no sensor in the display - if there is no water?
I wouldnt use tap water, it will leave deposits in your coolant system.
Deionised is the best and distilled is second best. You should be able to get distilled for reasonably cheapish from your local hardware store.
 
There's lots of places for a leak. Heater matrix/o-rings, radiator, so the pipes and connections, throttle body, head gasket, cylinder if you have a cracked block, but those last 2 would prioritise the coolant system.
What's easy to miss is a leaking joint or radiator that's evaporating/blown away by the fan before you can spot it
 
There's lots of places for a leak. Heater matrix/o-rings, radiator, so the pipes and connections, throttle body, head gasket, cylinder if you have a cracked block, but those last 2 would prioritise the coolant system.
What's easy to miss is a leaking joint or radiator that's evaporating/blown away by the fan before you can spot it

Cracked expansion tank, some leaks don't show till the pressure in the system is up ...
 
Ive been using Liqui Moly KFS12. That should be available pretty much anywhere.

I wouldnt use tap water, it will leave deposits in your coolant system.
Deionised is the best and distilled is second best. You should be able to get distilled for reasonably cheapish from your local hardware store.
We have a water softener. What comes out the tap is deionised water so I just use water straight from the tap.
 
We have a water softener. What comes out the tap is deionised water so I just use water straight from the tap.
Water softners use salt and indeed the water is judged to be bad fo consumption if for instance you have high blood pressure due to the high salt content, unless it's a new form of softner that works like a dehumidifier and produces condensate.
 
Water softners use salt and indeed the water is judged to be bad fo consumption if for instance you have high blood pressure due to the high salt content, unless it's a new form of softner that works like a dehumidifier and produces condensate.
The salt in a water softner is only used to back flush and clean the resin that does the softning bit, the bit they say was bad for you was a slight sodium content but they have decided that it is ok to drink now, i know all this as i have been subbing for Kinetico fitting softners for nearly a year now,
They wanted to pay me very good money to work for them so i took them up on it :vb-biggrin:
 
The salt in a water softner is only used to back flush and clean the resin that does the softning bit, the bit they say was bad for you was a slight sodium content but they have decided that it is ok to drink now, i know all this as i have been subbing for Kinetico fitting softners for nearly a year now,
They wanted to pay me very good money to work for them so i took them up on it :vb-biggrin:
Either way, a softener does not eliminate calcium carbonate and other minerals from the water so it's not suitable for topping up the RAD.
 
Water softners use salt and indeed the water is judged to be bad fo consumption if for instance you have high blood pressure due to the high salt content, unless it's a new form of softner that works like a dehumidifier and produces condensate.
We have three taps in the kitchen. Hot & cold softened water plus cold straight from the mains for filling up the kettle. We would never have considered fitting a water softener which was already installed when we moved into the house. It's a nice to have & only costs a quid or two a month for the salt although we use less soap & shampoo as the soft water lathers up so easily.
 
Either way, a softener does not eliminate calcium carbonate and other minerals from the water so it's not suitable for topping up the RAD.
I haven't needed to top up since the engine was completely rebuilt 18 months & 15K miles ago. I actually have an unopened litre of ready diluted OAT in the boot if the level ever drops.
 
Back
Top