Stone56's latest activity

As above its not just a matter of pushing it in its more like a gear Change !!

I have found you need to be quite slow when putting the Od in and out of gear. Keep us informed how you get on with fitting a solenoid.

Before you think it's wrong pads, check the calipers are working properly and not seized

Rears; 302mm diameter Thickness new 12mm Thickness at service limit 10mm Max runout 0.08mm

Nah, I'll help a Cantabrian to pay for his kids school shoes rather than give money to a Chinese iron works. I should think the rears do a lot less work than the fronts and will last a long time anyway. Anyone know the original and minimum...

Give it a new set of disks too, yer tight git!

We had are first Hoopoe arrive yesterday was still about this morning but still not heard a Cuckoo yet 😯😯

I think you can get a non slip epoxy for floors with spillage would be good You pay the money for new not damaged !!

Chinese tariffs ?

All good so far. Nothing at all to report over 6000 miles.... so I'm going to take that as a win! I kept my old LR hubs, so if you want to buy Timken bearings you can have my hubs and press the new bearings together before you start if you...

How are the Eurospares bearing going after a year ? I'm getting a rumble on mine about 60-65mph, mainly from the seat & floor, but not through the steering wheel. Feels like either rear wheels need balancing, or the bearings on their way out...

Finished the other side of the car just now.... Apart and back together in just over 2 hours. It's soooo much easier when the rusted bolts play ball!! Still going to replace all the bolts with new, the ones holding the mud shield on were just...

Got nearly one side done today..... At 159,000 miles and 27 years the hub assembly bolts, the rear caliper bolts, and the rear mud shield bolts had rusted solid. Heat and hammering got them all off, but I've mangled some of the heads, so I'm...

Well they’ve arrived. Green Eurospares labels on the boxes, not Britpart. They look okay…. Can’t see any branding on the bearings they've used…. we’ll see what they’re like once fitted. If they only last 100 miles I’ll report back!

Some pubes in a rizzla I think

Wot have you been smoking and can I have some please :p

It twas hailstones here earlier, which was nice

Not sealed it yet, I was thinking of doing a coloured epoxy floor. Ive just fitted the last piece of ridge plate yesterday I got them last sat & went to fit them, the one in the middle was all scratched so I took it back yesterday & changed it...

So you trimmed your pubes. Then wanted put aftershave on. But bottle says not for gonads area. So now itching in around your sack🤠 Hey interpretation if you wish 😁😁😁 Or the place you hid your stash in the roof needed weeding 🥸🤑 But your touts...

Need some drip trays ! Did you seal the over site concrete, worth having a look at some poly floor paint give it that professional look

Hell no & get oil on the new floor 🤣 🤣