Stanleysteamer's latest activity

Not wishing to tell my grandma how to suck eggs, I simply did this...

I don't own a D3 so cannot help you directly. @gstuart is the guru on them hence I tagged him. Have you contacted the seller to ask/tell them about this as it looks like he/she sold you a pup? At least as far as this is concerned.

@gstuart ??? Would it be in the handbook?

Warmer, dry and sunny over here. Just about to go out and water as CBA to do it last night in the dark. Need to fish out the paperwork to find out what to set tappets to on the big machine. Not even sure they will be in it. W and I have had...

That section is too full of "what's wrong with my gaylander", and "how do I fix my gaylander without breaking a finger nail" threads.

Mornin Light rain and a moderate breeze so far Was going to fit marker lights to trailer today, it's 45 years old and just has lights at the back Might go LED for rear lights/ indicators while I'm at it Undecided as to wheel colour, trailer is...

Morning All. :D Late.... awful night. Mr. Gout visited me. :( Have a good day. :D

THAY are because thay forget where thay stored them for the winter

Eye is feeling betterer. Me cold is going.

The same reasons that trains have been cancelled as the weather is to dry 😲😲

They av bin planting them for me. They aint daft.

Why don't you plant some nut tree's and cut the middle man out , and be green at the same time ??

I'm sitting here waiting for storm Floris. So far there's a breeze and a bit of drizzle. It's very silly to give every westerly low pressure system a name.

This has been covered before. BB is content for the thread to stay where it is. Seems we're a bit special..

23 Posts ago. I like to post a few about me tratter now and again. (As well as reminding Freelanderers of their inferior mode of transport :p). I like it here on the Beano page where it belongs 🤣

Shame that a certain person has come on here to hijack the thread and have a bash at others, having done the same in spades on another thread, which I am sure some of you will have seen. He obvs wants this thread to be moved to AG so he and his...

Nite

Just ordered some more nuts for me friends.

No. Fings from near the bread int sainsberrys.

Is that another two country buxom beauties 🥰

This ain't the thread for whatever axe it is you have to grind Gratch. Take it elsewhere please.

I probably will replace it. It dosent feel bad when tested.

Many people say that once you have got that far it is false economy to not change it. Well done on getting it out. Thin k of the money you have saved!! (Could spend it on a noo flywheel!;))

Hello. I got the gearbox and clutch out. Not a hard job just a bit fiddly with lots to remove. I made the landrover tool from the manual to fit gearbox and fitted it to my gear box jack. Removed gearbox and transfer box as one. Clutch has had it...

You can make a tool with a flat bar of steel. cut a short piece off, drillholes so that you can put a nut and bolt in one about 6 to 8 inches up the long peiec, and a corresponding one in the end of the short piece. So you are left with a Y...

Well, sometimes I feel like saying "I don't know where today has gone." Today I did say that to the neebs who has just fed me! I said that I had to go as I had to feed the dogs and get myself off to the farmer's market. At which point they told...

You can't really, except by editing them to empty then leaving a full stop. It might be nice if you told us how you sorted the problem out, it may help others in the future.

have you seen how much they are o_O:)