Recent content by Musher3

I certainly didn't know!!!😂

Hooray the wipers are working correctly now! Thanks Tim 4x4, it was the park ramp as you suggested. Who'd have thought that Craddocks would send me a Left Hand Drive windscreen wiper motor drive cog??!!!

Thanks. Yes I replaced the drive cog, the old one has missing teeth. I didn't know there was a specific position for it but that makes perfect sense now.

I'm restoring a 1989 130 and have just installed new windscreen wiper wheelboxes and drive cog for the cable. Looking at pictures of other wheelboxes I installed them with the cable on top. When I put new wiper arms on in the bottom parked position they would only clean the bonnet! They would...

FIXED IT!!!! It was the accelerator pedal, I managed to get a second hand but tested one on eBay on next day delivery. Iv'e taken it out for a couple of long runs yesterday and today and not had a single hesitation! The voltages on Hawkeye for the old pedal all looked good but because the...

I cut back the outer flexible wiring loom cover from the injector loom plug to the point where it swan necks up to be attached to the corner of the rocker cover and there was no hint of oil, similarly where the wires exit the loom to go into the red plug it is complete free from oil. Did I...

Hi Everyone. I recently bought a 2003 Disco 2 TD5 and it has had a recurring intermittent misfiring / hesitation fault. So far I have: checked the wastegate (which was free) connected the wastegate actuator directly to the turbo pipe; checked the voltage on the MAF (was OK) and tried running...