lynall's latest activity

Our 2a had a mesh on the filler neck, mind you it was so coarse even small twigs could get through it!

Have fished a small twig from the carb bowl of a Sherpa minibus ...

I think the logic is if they can stand paint/thinners then fuel should not be an issue. Lots of trucks also have a plastic mesh widget on the bottom of the standpipe.

Think series diesel had them on the end of the standpipe. Believe spray gun filters fit?

I am assuming the tacho head unit will be the receiving end for the plugs to er plug into. I am guessing they are not std landrover plugs/loom, so you will need to trace them to see what goes where. As the car is quite old it might have had an...

😂 I don't have any interior pics but I'll grab some tonight.

Tacho?

Then we can say ooooh and ahhh or ooooh and ahhh... Depending how it looks :)

Attach files. Media. Choose image. Insert. Full image, 👍

Anything specific you want to see ?

Never seen anything like that. I definitely haven't got one on mine. Or any of those other nmbers. You learn something every day!!

Pics from said green book Pic of diesel bits Pic of petrol bits Could not find chassis pipes for the diesel model This is for an early car so diesel would be 2 litre and not 2.25, unsure on petrol engine capacity

I think this is them, not been on there for a year or two now so it might have changed. https://series2club.co.uk/2023_new_forum/index.php

This was mine 93 200.

Old crap like we have they use the sticker under the bonnet to set their smoke meter. I have a pic I will find and post up, mine was white approx 30mm square with blakc letters saying something like 1.30.

Well Lynall that seemed to have done the trick ! Much appreciated my friend. I drained the system again, filled with your method exactly , and now I have heat before thermostat opens . Took it for a short drive and no over heating . Will take...

Green bible has good pics in it. Always worth joining the s2forum,

Pull out the speedo drives & swap

I have messed around with mine many times over the years, always a juggle to get power and little smoke. Always passes the mot, trick is to remove the sticker under the bonnet, no sticker means mot man has to use max figures (3 I think?) rather...

All the advice has been helpful. The pass few days the weather has been good and I spent a fair amount of time evaluating my project. It looks like it worst than I thought. The more you look ...reality becomes clearer. Most of the chassis has...

Remove rad top bung Remove bung on top of stat Fill coolant tank until fluid comes out of rad bung Refit rad bung Keep filling header tank until you are at correct level Refit header tank cap Carry on filling coolant through the stat bung until...

Make sure you do your research on who you’re using and don’t just go with the cheapest… https://www.landyzone.co.uk/land-rover/landrover-scam-5-sunbeam-street-wolverhampton-ebay-smart-reconditioning.339591/

There are many adjustments you can do on the pump. The top screw and star wheel can both effect off boost fuel delivery, hence why it feels better to drive, but as it is off boost the fuel is not being fully burnt hence your smoke. You will find...

Learned this word' meaning the hard way.