DanClarke's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    ... I saw the MIL in hospital this PM. Not great, but brighter than last time. Kept reporting to me that there were flies all over her bed sheets and occasionally that I had flies all over my face. I kept telling her there were no flies and that...
  • DanClarke
    DanClarke reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    Went to Wix this morning to collect me noo lawn sprinkler. Not had any rain for a while and ground is getting parched. Also got some noo 5mm and 6mm HSS drill bits as the ones I have been using for the last couple of decades are now scrap.
  • DanClarke
    DanClarke reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    No, he's thinking about Dan's version :cool:
  • DanClarke
    DanClarke reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    :rolleyes::rolleyes::rolleyes:
  • DanClarke
    DanClarke reacted to kevstar's post in the thread I would just like to say with Like Like.
    Wots wix ??
  • DanClarke
    DanClarke reacted to Stanleysteamer's post in the thread I would just like to say with Like Like.
    Dee yee nae hev Wickes north of the border? Bet there is a Scots equivalent.
  • DanClarke
    DanClarke reacted to Stone56's post in the thread I would just like to say with Like Like.
    So hot at the moment got some weeding done
  • DanClarke
    DanClarke replied to the thread Getting Gwen the Mini to Run..
    OK, so here are the very sooty BP6ES plugs. All equally awful, no special standout cases. I shall pop some BP5ES's in (hotter plugs I think). I hope they don't do any damage, and it might burn off the carbon. :)
    • 1749983926647.png
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    ...brownie-points have been earned. Broken wind-sculpture welded back together and working again. :) Sausage bacon & egg brunch in a short while. Visiting the old MIL in hosp this PM. :)
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Baps are boobies round here. ;)
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Morning All. :D A decent nights kip but then the NDN resumed his DIY building works at 08:56. He is hammer & chiselling out masonry. The noise travels straight through the ground and up our side-wall. :( Looks like a nice day out there, coffee...
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Well I would agree with you entirely. The spiel from the raffling org said it was all "souped up" with a stage 2'd head but when I got in touch with the previous owner directly before me he said it was a standard 1275 Metro lump in a Morris Mini...
  • DanClarke
    DanClarke reacted to landowner's post in the thread I would just like to say with Like Like.
    Just a thought... On a non standard engine throw the reference books away :)
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    I have an excess of soot on all plugs. I will pull all 4 tomorrow and take a picture (hopefully a decent one) to show y'all. I have a set of BPE5 plugs I could put in to see if they stay cleaner as they run hotter, but the book does say BPE6's...
  • DanClarke
    DanClarke reacted to landowner's post in the thread I would just like to say with Like Like.
    I've had more than ten Minis, gave up counting I've only ever had one that ran with light brown plugs and it burned an exhaust valve out. If you're anywhere from light grey to black without soot then it'll be fine :)
  • DanClarke
    DanClarke replied to the thread Getting Gwen the Mini to Run..
    Yes indeed, it left no trace. The oil is still clear from the last change so no black trail. I did put a tell-tale there and it came away clean and dry (still is) but after tightening the cover T-bolt a bit more the seep/leak has clearly stopped.
  • DanClarke
    DanClarke reacted to Stanleysteamer's post in the thread Getting Gwen the Mini to Run. with Like Like.
    Steel tres étrange zat you did not spot it running dahn zee sahd uv zee engine top!! 🤣 🤣
  • DanClarke
    DanClarke replied to the thread Getting Gwen the Mini to Run..
    Stirrer! ;)
  • DanClarke
    DanClarke reacted to kermit_rr's post in the thread Getting Gwen the Mini to Run. with Like Like.
    Henri🤣🤣
  • DanClarke
    DanClarke replied to the thread Getting Gwen the Mini to Run..
    OK it is time to "fess-up". It was the rocker gasket after all. :) The LH screw-down T-Bolt was not as tight as the RH side one. One extra quarter turn (to match the resistance felt on the RH side one) and the leak stopped. So well done all...
  • DanClarke
    DanClarke reacted to landowner's post in the thread Getting Gwen the Mini to Run. with Like Like.
    If your oil is very clean then maybe you can only spot the bit that has run down to plughole and got dirty
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Been out for a quick blatt around town in the mini. :) It always makes me smile. Oil leak sorted it seems. :) Worried a bit about over-fuelling and bore-washing the engine, but hard to say without an AFR gauge fitted. Nearly time for afternoon...
  • DanClarke
    DanClarke reacted to Hippo's post in the thread I would just like to say with Like Like.
    Ma hippo needs to get his dpf to 23 so he can regenerate. Few weeks ago he were on 17. Checked last nite after wuk and he were on 22.5. He dun't do many miles so it wood take several days to get to 23. We both like to go ferra drive to hexercise...
  • DanClarke
    DanClarke reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    Check the edge of the door is vertical with a spirit level, in the closed position and again at 90 degrees open position. This will indicate if the hinges need adjusting.
  • DanClarke
    DanClarke reacted to Hippo's post in the thread I would just like to say with Like Like.
    Fell out wiv me garage doors recently. They have moved so the wheels dun't touch the ground when closed. This means they pull apart slightly so the key has started to bent as turning it requires the doirs to pull togeffer. Eye has put some bits...
  • DanClarke
    DanClarke reacted to Stanleysteamer's post in the thread I would just like to say with Like Like.
    Don't think she's much into the latest fashion. Mayeb he's got her some more copper!!! 🤣🤣🤣
  • DanClarke
    DanClarke reacted to Stanleysteamer's post in the thread I would just like to say with Like Like.
    You'll have noticed we are not at "Rock and Cars". W has to keep her foot up and off it, and I am not trying to wheel her around a town crowded with peeps. I had the devils own job getting her from the parked car to the chemist's yessdi. No...
  • DanClarke
    DanClarke reacted to marjon's post in the thread I would just like to say with Like Like.
    I dont know thats quite a few outfits for the price of the scrap value ;). J
  • DanClarke
    DanClarke reacted to Hippo's post in the thread I would just like to say with Like Like.
    Different makes charge more as their kit is betterer. Price matching to a price point or competitor sometimes. Either was its betterer for the environment if peeps use one charger and set of batteries across multiple tools.
  • DanClarke
    DanClarke reacted to Stanleysteamer's post in the thread I would just like to say with Like Like.
    For thos who watch "Repair Shop"...
Back
Top