Recent content by Bife

Thanks, that is very helpful Is it possible that the switch only asks the 27VT to operate the door lock motors but not the deadlock motors, whereas the fob can ask the 27VT to operate the door lock motors and the deadlock motors? My doorlock motors don't work but the deadlock ones do (or at...

I found this page informative about the various systems in the FL1 over the years https://www.remotekey.co.uk/help/land-rover-freelander-key-fob-and-immobiliser-problems/

Is that video after the smoke has cleared? Mine does the same thing, but much more grey smoke, and lumpy for a few minutes. I cleared out the inlet manifold last summer and it cleared it. It was good since, until it started warming up and now it is doing it again now, but not for as long...

Thanks! No door card removal All levers open the doors manually Drivers door and all others lock with fob but not dash button, which I find strange Lots of motions heard, I think in all doors, but I think that is only the deadlock motors, I think I open the driver's door with the key after fob...

Hi I now have two working fobs They both lock all doors and 'undeadlock' the doors (clunks heard) but dont pop the buttons up. The drivers door button used to pop up, but recently gave up the ghost. I presume this is motors in locks. But, the lock/unlock button on the dash (lower centre) now...

I got the fob back to Portugal and finally today got it programmed on someone's Hawkeye. Works perfectly! I just wish my locking motors all did too :rolleyes: Now I have a spare!

ah, I see thanks

Me too For sure, when I cleaned my inlet manifold and EGR (latter wasnt too bad though) it made a heck of a difference I also thought the reason for getting clogged up could be the sump breather filter being blocked?

I thought that the problem with a clogged EGR was that it can get stuck open So the blanking mod just takes the valve part away So why not clean it out, ensure it's closed and disconnect the vacuum pipe so that it never opens (effectively removing the valve) and plug the vac pipe to avoid vac...

thank you @Nodge68 68?, nearly as good as 67.

Onto the tracking bit: Rave says toe out of -0.23 +- 0.23 degrees (0 to 0.46 degrees) Which by simple trig is 0 to 4.0 m/km Where do people run? Road mostly if not exclusively.

Just for future Reference:

its done now. not sure what at, he talked about 1.37 mm but then said straight ahead. I thought when i could speak fluently that i would understand but they never speak in a straight line here ... As long as it passes mot im happy Got a note last year tgat it was over 6 (m/km i think) and...

Yup. Iknow the equivalents that are ok if not siezed but I'm not doing the job. I was just surprised that he found imperial sizes on the freelander, especially a LHD for Portugal

Hi. Quick question I'm getting tracking done in portugal and he is trying to find imperial spanners / sockets as its a landrover Everything else i have done on the car is metric Its a 2001 Portuguese FL1 td4 Isnt everything metric? And what size are the tracking nuts? Please Cheers