Hi excellent write up. I need to do mine just checking if I need an extra person as when I have bled a system in the past on the old mini I had a mate press peddle whilst I opened the nipple then tightened it back up

Hiya do you know if there is a easy fix to the linkage in the master cylinder pedal mine keeps sliding off

OK cheers my mate has his own Mot station and says the new regs don't apply to older cars but I will put it back on if there is a problem

OK cheers I'm took the egr off months ago it' a 2003 have I got to put it back on for Mot

Thanks for that I thought it was below the one I put in the picture. Hopefully pretty easy to get to then

Is it the other end of this

Cheers I think I know where it is it has 2 wires going to it from air intake

Ok cheers Mike can I get to it with manifold in place?

Yes had a full service I changed the crank breather and took the early off. Not changed the hoses as wasn't sure on the one on left side by cooler. Is the map easy to change or can it be cleaned. Thanks for your help.

It struggles to pull above 50 to 60 with van on. If i received on drive in neutral it sometimes only goes up to so many revs then a flat spot

And what are the symptoms if either one is clogged up? I have to make sure I rev mine when pulling off if I just try clutch it' very weak. And when towing it like hills and here like a vacuum noise. Can see any visible leaks on pipes

Where is the map sensor is this different to the maf? I was going to buy a ronbox to help improve when towing might not bother now

Yes td4

OK cheers for that. So if I take the air intake off I will see the part you mean?

Expansion tank looks OK i can' see any residue. It' got the rachet type type so gonna try a new one anyway. I have taken fuse 5 out for now see if it makes any difference

Can the FBH cause the coolant to go down if it always comes on.? I'e had to top it up recently but can't see any visible leaks or residue in oil

Photo 1 looks similar to my photo so will check all those. But not sure on photo 2 mine is a 53 plate 2.0Td4

Ok cheers for all your help is it 7-9mm i need to order

Ok cheers mate i know which ones you mean

These ones