are you sure tyres arent rubbing on radius arm

yes with a small chisel etc

yes

good luck then,your in the right place for any help

have you tried insuring it they wouldnt insure my kids as a first car

yes but its not synchro so not under power or high revs,so just ease off whilst selecting,same with yellow knob

its hard to judge from the pics

you either leave rings and bores alone or hone and fit new rings(gapping each one in the bore its going to live in first before fitting to piston)

no fuel pump timing is 13 degrees btdc (marks on flywheel)compression stroke no1,as can be checked through plug in side of the pump

whack them with a punch similar size to the screw head that should loosen them if done enough

when all the timing marks line up no1 exhaust valve should be fully open the engine is timed at exhaust peak

the same pump and box have been run on atf for decades well enough, it wasnt an issue needing sorting

you cant ,a pipe on the bleed nipple and keep filling till colour changes would be best way, but mixing wont hurt nor will using the atf

yes if its disturbed it might very well be letting air in

stumpy bell housing was produced to fit r380 boxes into warranty 200tdi landys as they stopped lt77 production completely,when 300 and r380 came out

straight fit

yes to both, though not that much considering whats needing doing in any case, unblocking the old door way is just a matter prising each brick up they are only secured by lime mortar and it would improve the room

into what is at the moment an alcove in the kitchen

the mrs has just decided we might brick the front room door up and open up the door way we found behind the lath and plaster

need a better pic of sender