Thanks, I suppose all will be reviled once the door card is off.

my front near side door speaker seems to rattle, especially when listening to loud music. Moving the balance to the right cures it. Any body experienced this before, any tips. I will probably take the door card off at the weekend and have a look. Thanks.

When my one went, it was shredding the fan belt slightly, and it could be heard slightly on tick over with engine lid open. I was not able to wobble it when fitted to the car, but with the coupling off, with fan blade still fitted, I put it in a vice and was clearly able to see and feel a slight...

Makes sense to me, if it's just the blade and the bearing in the fan coupling is fine, then why change it, should save a few quid.

Also, and forgive me for talking out of turn, but I take it you have a NATO hitch on the back of your vehicle?

You should ask on the 101 forum, someone their should know. I used to be in a Rapier Regiment, but can't remember for sure. The Detachment had 3 vehicles, 2 x 101 to pull the launcher and radar tracker, then a 3/4 ton L/R (series 3 in the old days) to pull the 1 ton MST that you have bought.

They were designed to hold aircraft together, so yup, should hold well.

I bought a kit from carbonfibergeneration on eBay last week, good quality kit with quick delivery, so recommended.

Maybe they mean it's not the belt for the air conditioning. Rimmer brothers tend to have a good selection.

It might have something to do with the inertia crash sensor. I have had mine come on when I hit a big lump off roading. When it activates, the central locking is supposed to operate as well. Turning ignition off, then back on is supposed to cure it though. Anyway, just a thought.

Thanks James Martin, that's what he did, good job

Thanks Bigeeee for rave. Problem now solved. My mate read about releasing pressure somwhere on web. So thanks all, all will be done in 10 minutes

I believe it is ACE fitted. I don't know anything about ACE

Bit difficult to photo, the D2 anti roll bar seems to have hydrolics on one side, so when you line up one side to fit a drop link, the other side will not mate up to fit the other drop link. The instinct is to pull the dar down, but the pressure in the hydrolics stops this. I imagine we have to...

Friend has mot re test tomorrow. We are fitting rear anti roll bar links x 2. He took one end off last night but drove to me tonight. Now the two links are our of sync. How do we get them both level to re fit links. Is this an ACE thing?? Thanks in advance

Got mine from MCB4x4 same as yours, but no noise issue. I removed the name plate from the front because he welded on upside down, don,t know if that is the issue on yours. as ER1C says, could be the lights.

Ah, covert operations, the tuxedo will give the game away

It will be the 5.56 as I was on camp today, just wasn't expecting that to happen.

Do you drive a DB5 by any chance

Yes it is, I thought it was a 9mm pistol case at first so thought I would get away with it, but as I started to pull it out I discovered it was a 5.56 rifle case. I have worked on Army bases for 29yrs, but never known anyone pick up a spent cartridge in a tyre.